Information for ruling 600008836
This section is Advance Tariff Ruling
- Start date
- 26 Oct 2023
- Expiry date
- 25 Oct 2026
- Commodity code
- 8412298990 (opens in new tab)
- Description
- The hydraulic power pack has been designed to be used with a 10t tensioner. The power pack is containerised within an outer shell of ductile cast iron. Contained within the unit is a single electric motor and pump set, overhead reservoir, electric motor starter panel and a HPU control panel. The single electric motor drives the three pumps from a common shaft. The main drive pump, which is an axial piston open loop pump, this pump operates in either a load sensing or a pressure control mode. There are various valves which are mounted to the framework, which are used for the pump control functions. The grip/brake pump is a tandem gear pump which uses a relief valve to limit output pressure from each pump section. The relief valves have vent able pilot lines fitted with ball valves for dumping pressure, while starting and stopping the electric motor. The seawater/oil cooler is used to dissipate any heat which may have built up within the system, the return flow from all of the three pumps goes back to the reservoir via the cooler. The starter panel contains all the necessary components for starting and stopping the electric motor, along with any power transformers that could be operating within the system. Also, there is a HPU control panel, this houses the plc, which is used to control the main drive pump functions, there is also a human machine interface (HMI) panel this is for in-putting the various control parameters.
- Keywords
-
- PUMPS
- WITH CONTROL DEVICE
- CONTAINERS
- HYDRAULIC
- WITH ELECTRIC MOTOR
- PRESSURE SENSORS
- COMMON SHAFT
- Justification
- Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, Reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b) General interpretative rules (GIR)s: Gir 1 has been used to classify this product by the terms of heading 8412 - other engines and motors. Gir 6 has been used to classify the goods to subheading level 8412 29 - hydraulic power engines and motors. Eight digit code 841229 89 - other than hydraulic fluid power motors Ten digit code code 84122989 90 - other than for use in certain types of aircraft. Also classified in accordance with: Note 2 (a) to Section XVI Note 4 to Section XVI Harmonised system explanatory notes (HSEN's) Note (b) (6) to Heading 8412.