Information for ruling 600008858
This section is Advance Tariff Ruling
- Start date
- 21 Nov 2023
- Expiry date
- 20 Nov 2026
- Commodity code
- 7308909890 (opens in new tab)
- Description
- This product is an on-ground anti-trip bracing set for temporary site fencing. The temporary fencing brace and tray is made of pre-galvanised steel and the helps to prevent trip hazards to pedestrians. In place of standard temporary fence feet, this system bears the weight and provides support on the working side of the fencing whilst the temporary fence panels are inserted into our Zero-trip bases allowing the pedestrian to be free of protruding feet and improving pedestrian safety. Included in this system is a zero-trip base, zero-trip bar, a temporary fencing support strut and a ballast tray. (Ballast not included).
- Keywords
-
- FENCING EQUIPMENT
- FOR SAFETY
- OF STEEL
- GALVANIZED
- Justification
- Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 has been used to classify this product by the terms of heading 7308: Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel GIR 6 has been used to classify the goods to subheading level 730890: Other than elsewhere specified within this subheading 8 Digit code 73089098: Other than solely or principally of sheet 10 Digit code 7308909890: Other than steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications - equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled Also classified in accordance with: Note 3 to Section XV Harmonized System Explanatory Notes (HSEN's) to heading 73.08