Information for ruling 600008860
This section is Advance Tariff Ruling
- Start date
- 17 Oct 2023
- Expiry date
- 16 Oct 2026
- Commodity code
- 7308909890 (opens in new tab)
- Description
- Designed for use on a run of pedestrian barriers or temporary mesh fencing, the Crossing Point Barrier provides a clear, designated safe access point for pedestrians and site workers. The 2.3m (W) X 2m (H) unit is manufactured from steel with a red powder coated finish, providing a clear visible pedestrian access point on a run of barriers or fencing. As a fixed foot barrier, this unit can stand without additional support, but is compatible with recycled fence feet if desired. Also included is an integral spring loaded pedestrian gate which only swings in one direction and self-closes. Each unit can be secured with either metal feet or recycled fence feet, secured by standard or anti-tamper temporary fencing couplers.
- Keywords
-
- BARRIERS
- FENCING
- OF METAL
- CONSTRUCTION BARRIERS
- STRUCTURES
- FOR PROTECTION
- Justification
- Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIRS) – GIR 1 – Has been used to classify this product by the terms of heading under section: 7308 - Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel. GIR 6 – Has been used to classify the goods to subheading level: 730890 - Other than elsewhere specified in this heading. Eight Digit Code - 73089098 - Other than Solely or principally of sheet. Ten Digit Code - 7308909890 - Other than Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications - equal to or in excess of 1.00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled. Also classified in accordance with: Section 3 to XV Harmonised System Explanatory Notes (HSENs) to heading 73.08