Information for ruling 600011847
This section is Advance Tariff Ruling
- Start date
- 25 Nov 2024
- Expiry date
- 24 Nov 2027
- Commodity code
- 9031808000 (opens in new tab)
- Description
- The interleaved grid on the top of the DS-4C is the precipitation or “moisture" sensor. The brass cylinder protruding from the bottom of the enclosure is the temperature sensor. For reliable rain and snow detection the unit must be mounted in a location that exposes the moisture sensor to a clear view of the sky. The unit should not be mounted directly under eaves or overhangs. It should not be mounted so close to the ground that it may become buried in snow. For proper temperature detection the DS-4C must be mounted outdoors, away from sources of heat. Operating temperature range is -40°C to +85°C. Note that, when powered, the DS-4C moisture grid will always remain hot. This is normal. This allows the sensor to continuously melt snow and evaporate both rain and snow from the grid. The DS-4C can be mounted by screwing the base conduit hub onto an appropriate size free-standing conduit or by using the mounting holes in each corner of the enclosure.
- Keywords
-
- FOR MEASURING TEMPERATURE
- FOR DETECTION
- CONTROLLERS
- SENSORS
- WIRED
- IN A HOUSING
- Justification
- Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 9031 - Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors GIR 6 has been used to classify the goods to subheading level 9031 80 – Other instruments, appliances and machines 8 Digit Code 903180 80 – Other than For measuring or checking geometrical quantities Also classified in accordance with: Harmonised system explanatory notes (HSENs) to Heading 9031