Skip to main content
Back

This section is Advance Tariff Ruling Information for ruling 600016558

Start date
30 Oct 2026
Expiry date
29 Oct 2029
Description
Steel Hardened Bushings. They are cylindrical plain bearings with integrated lubrication features, consisting of a single circumferential groove on the outer surface and a spiral lubrication groove machined into the inner bearing surface. These grooves distribute grease along the bearing interface during oscillating or rotating movement. The bushings are used to support shafts and pins in hydraulic cylinders, agricultural machinery, earthmoving equipment and industrial linkage assemblies. After initial greasing, the lubrication grooves allow extended lubrication intervals of up to 550 hours. Each bushing carries indelible lot marking for traceability. The goods are supplied individually or in bundles, wrapped in anti‑corrosion paper and packed in labelled cartons. Dimensions 40mm x 50mm x 40mm.
Keywords
  • OF BASE METALS
  • HOUSINGS
  • HARDENED, METAL
  • OF ALLOY STEEL
  • GROOVED
  • MACHINE PARTS
  • PLAIN SHAFT BEARINGS
  • CYLINDRICAL
Justification
Classification has been determined in accordance with the following:- For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect : a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General Interpretative Rules (GIR)s: GIR 1 - Has been used to classify this product by the terms of heading 8483 - Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints.) GIR 5 B - Has been used to identify the type of packaging - Packed in labelled cartons. GIR 6 - Has been used to classify the goods to subheading level 8483 30 - Bearing housings, not incorporating ball or roller bearings; plain shaft bearings. 8 Digit Code: 848330 80 - Plain shaft bearings. 10 Digit Code: 84833080 90 - Other than; For use in civil aircraft. Also classified in accordance with: Note 2a to Section XVI Harmonized System Explanatory Notes (HSEN’s) (B) to 8483.