Skip to main content
Search for Advance Tariff Rulings

You can search using a combination of words, commodity codes and reference numbers.

Search results

Showing 6,501 to 6,525 of 7,418 results.

  1. Ruling reference 600006849

    Description
    Non-usb mobile smartphone charger with a UK 3 pin mains plug. Product comprises of a sphere that charges the mobile phone connected to wall power socket. The device is compatible with only specific types of mobile phone as it has a wired 3.5mm connection. Input AC to DC 5 volts. Product dimensions: 102mm x 20.8mm. Weight 117g.
    Keywords
    • STATIC CONVERTERS
    • OF PLASTIC
    • RECTIFIERS
    • ELECTRICAL PLUGS
    • MOBILE TELEPHONES
    Expiry date
    18 Jun 2026
    Commodity code
    8504408390 (opens in new tab)
    View ruling 600006849

  2. Ruling reference 600005131

    Description
    An analogue-addressable heat detector, incorporating short circuit isolation protection plus a range of heat detection modes. It utilises a thermistor of low thermal mass as its sensing element. This product and its variants cannot be used as stand-alone heat detectors: they must only be used as part of a Nittan Evolution protocol fire alarm control system & must only be connected using a suitable detector mounting base. This product comprises a polycarbonate (ABS type) plastic casing containing metal fasteners, screws and connectors plus a populated printed circuit board (PCB) with the thermistor sensing element attached plus an externally visible light-emitting diode (LED) attached (also connected to the PCB). This product offers a range of heat detection modes (A1R, A2S, BS & CS types), which are selectable by the fire alarm system control panel. The short circuit isolator feature of the EV-H2-SCI is intended only to isolate this device from the rest of its network in the event of a fault - it is not intended as a protective safety feature. The isolator will self-reset when the fault clears. The externally visible OmniView 360-degree LED fitted serves only to indicate when the detector is being queried by its fire alarm control system or is in alarm mode: it isn't intended as a visual warning of fire to any persons nearby and plays no part in the sensing function of this detector. No physical or chemical analysis is carried out by this product. This product is imported specifically for Nittan Europe Limited and cannot be resold as an "off the shelf" product in general stores nor by any non-specialist outlet. This product does not have an integral sounder or recording device and contains no audio-visual warning equipment. While it can be sold singly in its own small cardboard box, it will more commonly be despatched in larger cardboard boxes containing 10 or 100 units.
    Keywords
    • SMOKE DETECTORS
    • WITHOUT SOUND SIGNALLING
    • OF PLASTIC
    • FOR DETECTION
    • FOR BUILDINGS
    • SAFETY EQUIPMENT
    Expiry date
    18 Jun 2026
    Commodity code
    8531103000 (opens in new tab)
    View ruling 600005131

  3. Ruling reference 600005130

    Description
    An analogue-addressable heat detector that utilises a thermistor of low thermal mass as their sensing element. It comprises a polycarbonate (ABS type) plastic casing containing a populated printed circuit board (PCB) with the thermistor sensing element and holder attached. It also contains metal screws, fasteners and connectors (terminals) plus an additional externally visible OmniView light-emitting diode (LED), which is also connected to the PCB. This detector and its variants cannot be used as stand-alone heat alarms: they must only be used as part of a Nittan Evolution protocol fire alarm control system and must only be connected via a suitable detector mounting base. The externally visible Omni View 360-degree LED serves only to indicate when the detector is being queried by its control panel or is in alarm mode; it isn't intended as a visual warning of fire to any persons nearby - the fire alarm system control panel to which it is linked triggers any warnings or other operations as necessary. This externally visible LED plays no part in the heat sensing function of this product. These products are imported specifically for Nittan Europe Limited and cannot be resold as an "off the shelf" product in general stores nor by any non-specialist outlet. This product does not have an integral sounder or recording device & contains no audio-visual warning equipment. While it can be sold singly in its own small cardboard box, it will more commonly be despatched in larger cardboard boxes containing 10 or 100 units.
    Keywords
    • SENSORS
    • SMOKE DETECTORS
    • WITHOUT SOUND SIGNALLING
    • OF PLASTIC
    • FOR DETECTION
    • FOR BUILDINGS
    • SAFETY EQUIPMENT
    Expiry date
    18 Jun 2026
    Commodity code
    8531103000 (opens in new tab)
    View ruling 600005130

  4. Ruling reference 600005129

    Description
    The smoke detector incorporates short circuit isolation protection. It utilises the light scatter sensing principle, using a light emitting diode (LED) & a photo-diode within its sensing chamber. When smoke enters the sensing chamber, the photo-diode senses increased levels of infra-red light scattered by smoke particles; the sensor then goes into alarm mode. The short circuit isolator is intended only to isolate this device from the rest of its network in the event of a fault - it is not intended as a protective safety feature. The isolator will self-reset when the fault clears. This product comprises a polycarbonate (ABS) plastic casing containing metal fastenings & connecting terminals plus a populated circuit board with the sensing chamber attached to the PCB plus an additional externally visible Omni View LED attached (also connected to the PCB). The externally visible 360-degree Omni View LED fitted serves only to indicate when the detector is being polled by its control panel or to show that the detector is in alarm mode, it forms no part of the sensing function of this product and is not intended to act as a visual warning of fire to any persons in its vicinity. This product is not designed for the purposes of physical or chemical analysis - it is intended only to report an alarm condition upon the detection of smoke. It cannot be used on a stand-alone basis and does not have an integral sounder or recording device. While it can be sold singly in its own small cardboard box, it will more commonly be despatched in larger cardboard boxes containing 10 or 100 units.
    Keywords
    • SENSORS
    • SMOKE DETECTORS
    • WITHOUT SOUND SIGNALLING
    • OF PLASTIC
    • FOR DETECTION
    • FOR BUILDINGS
    • SAFETY EQUIPMENT
    Expiry date
    18 Jun 2026
    Commodity code
    8531103000 (opens in new tab)
    View ruling 600005129

  5. Ruling reference 600005127

    Description
    The Nittan EV-PY is an analogue-addressable optical smoke detector, intended as a replacement for the earlier Nittan EV-P product. It utilises the light scatter sensing principle, using a light emitting diode (LED) & a photo-diode within its sensing chamber (now of the same optical sensing element design as for Nittan's EV-PYS product). The address of this product on its fire alarm system network is set using a Nittan EV-AD2-EXT hand-held address programmer. When smoke enters the sensing chamber, the photo-diode senses increased levels of infra-red light scattered by smoke particles; the sensor then goes into alarm mode. The product is similar in all respects to the existing Nittan EV-P product. This product comprises a polycarbonate (ABS) plastic casing containing metal fastenings & connecting terminals plus a populated circuit board with the sensing chamber attached to the PCB plus an additional externally visible OmniView LED attached (also connected to the PCB). The 360-degree OmniView LED fitted serves only to indicate when the detector is being polled by its control panel or to show that the detector is in alarm mode. it forms no part of the sensing function of this product & is not intended to act as a visual warning of fire to any persons in its vicinity. This product is not designed for the purposes of physical or chemical analysis - it is intended only to report an alarm condition upon the detection of smoke. This product cannot be used on a stand-alone basis: it must only be used as part of an analogue-addressable fire alarm control system using the Nittan Evolution communication protocol & must only be connected via a suitable detector mounting base. The versions listed in the confidential information section differ only in their identification labelling, which varies according to customer requirement; they are otherwise identical in design, appearance & functionality, all of which are similar to the Nittan EV-P product. The product is imported specifically for Nittan Europe Limited & cannot be resold as an "off the shelf" product in general stores or by any non-specialist outlet. This product does not have an integral sounder or recording device. While it can be sold singly in its own small cardboard box, it will more commonly be despatched in larger cardboard boxes containing 10 or 100 units.
    Keywords
    • CONTROL PANEL
    • FIRE ALARMS
    • SAFETY EQUIPMENT
    • LED
    • INFRARED SENSORS
    • SENSORS
    • WITHOUT SOUND RECORDING DEVICE
    • SMOKE DETECTORS
    • CIRCUIT BOARD
    Expiry date
    18 Jun 2026
    Commodity code
    8531103000 (opens in new tab)
    View ruling 600005127

  6. Ruling reference 600005124

    Description
    The Nittan EV-PYH-SCI is a combined analogue-addressable optical smoke detector & heat sensor, incorporating short circuit isolation protection plus a range of heat detection modes. This product cannot be used on a stand-alone basis: it must only be used as part of an analogue-addressable fire alarm control system using the Nittan Evolution communication protocol & must only be connected to such a system via a suitable detector mounting base. The address of this product on its fire alarm system network is set using a Nittan EV-AD2-EXT hand-held address programmer. For smoke detection it utilises the light scatter sensing principle: using a light emitting diode (LED) & a photo-diode within its sensing chamber (now of the same optical sensing element design as for Nittan's EV-PYS product); for sensing of heat it uses a thermistor of low thermal mass. This product comprises a polycarbonate (ABS) plastic casing containing metal fasteners, screws & connecting terminals plus a populated printed circuit board (PCB) with the sensing elements above attached, plus an additional externally visible LED (also connected to the PCB). The short circuit isolator feature of the EV-PYH-SCI is intended only to isolate this device from the rest of its network in the event of a fault - it is not intended as a protective safety feature. The isolator will self-reset when the fault clears. The primary function of this product is the detection of smoke, hence the nomenclature applied for; but in addition this product offers a range of heat detection modes (A1R, A2S, BS & CS types), which are selectable by the fire alarm system control panel. The versions listed in the confidential information section differ only in their identification labelling, which varies according to customer requirement; they are otherwise identical in design, appearance & functionality, all of which are similar to the Nittan EV-PYH product. The external 360-degree Omniview LED serves only to indicate when the detector is being polled by its control panel or to show that the detector is in alarm mode: it forms no part of the sensing function of this product & is not intended to act as a visual warning of fire to any persons in its vicinity. This product is not designed for the purposes of physical or chemical analysis - it is intended only to report an alarm condition upon the detection of smoke and/or heat. This product is imported specifically for Nittan Europe Limited & cannot be resold as an "off the shelf" product in general stores nor by any non-specialist outlet. This product does not have an integral sounder or recording device. While it can be sold singly in its own small cardboard box, it will more commonly be despatched in larger cardboard boxes containing 10 or 100 units
    Keywords
    • DETECTORS
    • SMOKE DETECTORS
    • WITHOUT SOUND SIGNALLING
    • OF PLASTIC
    • ANALOGUE
    • FOR BUILDINGS
    Expiry date
    18 Jun 2026
    Commodity code
    8531103000 (opens in new tab)
    View ruling 600005124

  7. Ruling reference 600005120

    Description
    A conventional optical smoke sensor which utilises the light scatter sensing principle: utilising an orange light-emitting diode (LED) and a photodiode within its sensing chamber. When the smoke enters this chamber, the photo-diode senses increased infra-red light scattered by the smoke particles and the detector then goes into alarm mode. This product comprises a polycarbonate ABS plastic casing containing metal fasteners, screws, and connectors plus a populated printed circuit board (PCB) with the sensing chamber, an insect protection mesh plus a further externally visible Omni View LED all attached (the sensing chamber and the further LED both also being connected to the PCB). The externally visible 360-degree Omni View LED serves only to indicate when the detector is in alarm mode - it forms no part of the sensing function of this detector which is not intended as a visual warning of fire to any persons nearby. The other similar version of this product differs only in its being a "zero ohm" resistance version, rather than the standard 375-ohm resistance of the previous model. In all other respects this product is identical in appearance and functionality. Both versions of this product are compatible only with UL-compliant fire alarm control systems must only be connected via a suitable, UL- compliant detector mounting base. There has been no change to the design, appearance or functionality of this product or its variants. The product is imported specifically for this company and cannot be resold as an "off the shelf" product in general stores or by any non-specialist outlet. This product does not have an integral sounder or recording device. Operating Voltage 12 VDC to 32 VDC, System Voltage 24 VDC and Dimensions φ104 mm x H 33 mm (Detector head only) φ104 mm x H 48 mm (Detector head and Base.) While the item can be sold singly in its own small cardboard box, it is more commonly dispatched in larger cardboard boxes containing 10 or 100 units.
    Keywords
    • ELECTRONIC
    • SMOKE DETECTORS
    • OF PLASTIC
    • FOR BUILDINGS
    • SAFETY EQUIPMENT
    • LED
    Expiry date
    18 Jun 2026
    Commodity code
    85311030 (opens in new tab)
    View ruling 600005120

  8. Ruling reference 600005067

    Description
    An analogue- addressable photoelectric smoke detector. It detects smoke by the light scatter sensing principle, using a light emitting diode (LED) & a photo diode within its sensing chamber. This product is not designed for the purposes of physical or chemical analysis, just to report an alarm condition upon detection of smoke or heat. The primary function of this product is the detection of smoke, so does not have an integral sounder or recording device. The exterior LED serves only to indicate when the detector is being polled by its control panel or to show that the detector is in alarm mode. This product comprises of a plastic (ABS type) casing containing metal fastenings & connectors plus a populated printed circuit board with the sensing elements plus a dust protection mesh attached. This product cannot be used on a stand-alone basis: it can only be used as part of an analogue-addressable fire alarm control system. It can be sold singly in its own small cardboard box, but normally sold in larger cardboard boxes containing 10 or 100 units.
    Keywords
    • ELECTRONIC
    • SMOKE DETECTORS
    • ANALOGUE
    • FOR BUILDINGS
    • SAFETY EQUIPMENT
    • LED
    Expiry date
    18 Jun 2026
    Commodity code
    85311030 (opens in new tab)
    View ruling 600005067

  9. Ruling reference 600007326

    Description
    This product is a a pad of paper sticky notes with a total of 90 sheets, in the colours blue and yellow and are ruled. Size of each sticky note is approx. 10.5cm x 10cm. The sticky notes come packaged in a polybag with a header card.
    Keywords
    • OF PAPER
    • SELF-ADHESIVE
    • PADS
    • NOTE BOOKS
    Expiry date
    15 Jun 2026
    Commodity code
    4820103000 (opens in new tab)
    View ruling 600007326

  10. Ruling reference 600007325

    Description
    This product is blank self-adhesive labels in the colour white, they come in a pack of 10 sheets and have a total of 240 labels. Pack of labels is packaged in a polybag with a head card.
    Keywords
    • OF PAPER
    • LABELS
    • SELF-ADHESIVE
    • WHITE
    Expiry date
    15 Jun 2026
    Commodity code
    4821901000 (opens in new tab)
    View ruling 600007325

  11. Ruling reference 600007298

    Description
    This product is 20pc of paper cut into shapes of people that are white in colour and measure at 13cm x 22.5cm. They come packaged in an OPP (Oriented polypropylene) bag, sealed with a head card.
    Keywords
    • OF PAPER
    • CUT
    • WHITE
    • ARTS AND CRAFTS
    Expiry date
    15 Jun 2026
    Commodity code
    4823908580 (opens in new tab)
    View ruling 600007298

  12. Ruling reference 600007054

    Description
    A wall-mounted tv bracket with an arm, so that the TV can be moved into a suitable position when mounted on the wall. It is made from cold rolled iron plate.
    Keywords
    • BRACKETS
    • OF METAL
    • WALL MOUNTED
    • OF IRON
    • FOR TELEVISION SET
    • FOR FIXING
    • ADJUSTABLE
    • FOR HANGING UP
    • WALL HANGINGS
    • MOUNTED
    Expiry date
    15 Jun 2026
    Commodity code
    7326909890 (opens in new tab)
    View ruling 600007054

  13. Ruling reference 600007044

    Description
    A wall mounted bicycle holder. It is used to hang a bicycle vertically to save space. It is made from iron and TPE (Thermoplastic Elastomer).
    Keywords
    • HOOKS
    • FOR BICYCLES
    • WALL MOUNTED
    • FOR HANGING UP
    • OF STEEL
    Expiry date
    15 Jun 2026
    Commodity code
    7326909890 (opens in new tab)
    View ruling 600007044

  14. Ruling reference 600006334

    Description
    This is a food cover which opens up to the shape of an umbrella to place over food for protection against insects. It is made from a lightweight metal frame with netting constructed over the top. It opens up by a toggle at the top to keep it in place. The frame is made from 60% iron, the mesh is made from 30% polyester and the textile material is 10%; it is non-woven; it has a layer of lace at the bottom for decoration. It measures 30cm in length. It is folded for storage and packed in a plastic bag with a card header.
    Keywords
    • OF POLYESTER
    • FOR PROTECTION
    • FRAMES
    • UMBRELLAS
    • NETTING
    Expiry date
    15 Jun 2026
    Commodity code
    5608191900 (opens in new tab)
    View ruling 600006334

  15. Ruling reference 600006271

    Description
    9-piece key tags. Each tag is a polypropylene plastic cover holder that contains an insertable paper slip which allows the customer to add their information; they are then fastened with an iron key ring. The key tags are in three colours blue, red and yellow (3 of each). They are packaged with a cardboard information hanging tag in a plastic blaster pack.
    Keywords
    • FOR LUGGAGE
    • LABELS
    • OF PLASTIC
    • AS RECTANGLES
    Expiry date
    15 Jun 2026
    Commodity code
    3926909790 (opens in new tab)
    View ruling 600006271

  16. Ruling reference 600007528

    Description
    A 200ml bottle of boot cleaner. This is water-based, deep-cleaning liquid which removes grime and restores appearance to all rugged leather and footwear types. Packaged in a plastic bottle.
    Keywords
    • FOR SHOES
    • MIXTURES
    • FOR CLEANING
    • WATER
    • BOOTS
    • PUT UP FOR RETAIL SALE
    Expiry date
    14 Jun 2026
    Commodity code
    3402509000 (opens in new tab)
    View ruling 600007528

  17. Ruling reference 600007527

    Description
    A 100ml bottle of shoe deodoriser. This is a water-based shoe refresher spray which instantly absorbs odours and helps keep shoes fresher for longer. Packaged in a plastic bottle.
    Keywords
    • FOR SHOES
    • ODORIFEROUS
    • PUT UP FOR RETAIL SALE
    • DEODORIZERS
    • AS SPRAY
    Expiry date
    14 Jun 2026
    Commodity code
    3307900000 (opens in new tab)
    View ruling 600007527

  18. Ruling reference 600007526

    Description
    A 200ml bottle of footwear sole cleaner. This cleaning formula is designed to renew the appearance of plastic soles. Packaged in a plastic bottle.
    Keywords
    • FOR SHOES
    • DETERGENTS
    • AS LIQUID
    • OUTER SOLES
    • PUT UP FOR RETAIL SALE
    • FOR CLEANING
    Expiry date
    14 Jun 2026
    Commodity code
    3402509000 (opens in new tab)
    View ruling 600007526

  19. Ruling reference 600007525

    Description
    A 200ml footwear foam cleaner. Water-based, deep-cleaning liquid removes grime and restores appearance to all rugged leather and footwear types. Packaged in a plastic bottle.
    Keywords
    • FOR SHOES
    • DETERGENTS
    • PUT UP FOR RETAIL SALE
    • FOR CLEANING
    • FOR LEATHER
    • AS LIQUID
    • MIXTURES
    Expiry date
    14 Jun 2026
    Commodity code
    3402509000 (opens in new tab)
    View ruling 600007525

  20. Ruling reference 600007524

    Description
    A 125ml water-based shoe protector spray. An advanced, solvent-free formula which provides durable protection against rain, stains and dirt. Product is intended for the protection of all types of shoe materials including leather and textile or combinations. Packaged in a non-pressurised aluminium can with pump spray and PP overcap.
    Keywords
    • FOR SHOES
    • PUT UP FOR RETAIL SALE
    • FOR PROTECTION AGAINST RAIN
    • WATER
    • FOR COATING
    • AS SPRAY
    • IN CANS
    • WATERPROOF
    Expiry date
    14 Jun 2026
    Commodity code
    3809930000 (opens in new tab)
    View ruling 600007524

  21. Ruling reference 600007523

    Description
    A 100ml bottle of footwear leather cleanser. Water-based wax emulsion includes both beeswax and shea butter. This gently cleans and cares for smooth leathers with delicate finishes. Packaged in a plastic bottle.
    Keywords
    • FOR SHOES
    • FOR SPRAYING
    • DETERGENTS
    • PUT UP FOR RETAIL SALE
    • FOR CLEANING
    • BEESWAX
    • FOR LEATHER
    • AS LIQUID
    • MIXTURES
    Expiry date
    14 Jun 2026
    Commodity code
    3405100000 (opens in new tab)
    View ruling 600007523

  22. Ruling reference 600007484

    Description
    This is a plastic spoon used for scooping ice-cream. It comes in several colours and is packed on a card board backing.
    Keywords
    • SCOOPS
    • OF PLASTIC
    • PUT UP FOR RETAIL SALE
    • KITCHENWARE
    Expiry date
    14 Jun 2026
    Commodity code
    3924100090 (opens in new tab)
    View ruling 600007484

  23. Ruling reference 600007474

    Description
    This is a 1/2 inch tap connector used for attaching to an outdoor tap for attaching a hosepipe to. It is made from a tough plastic and a robust rubber, and a heavy duty stainless steel clip for tightening to the tap to stop water leakages. It is black and is packed in a card back with a blister front.
    Keywords
    • TAPS, COCKS AND VALVES
    • HOSES
    • FOR THE GARDEN
    • OF PLASTIC
    Expiry date
    14 Jun 2026
    Commodity code
    3917400099 (opens in new tab)
    View ruling 600007474

  24. Ruling reference 600007472

    Description
    A dual male tap connector. It is slightly wider at the top with a threaded top for connecting to a tap and a hosepipe connects to the narrower part. It is made from a frost resistant durable plastic. Green in colour with a black rubber ring.
    Keywords
    • PLASTICS
    • PIPES AND TUBES PARTS
    • HOSES
    • PIPE FITTINGS
    Expiry date
    14 Jun 2026
    Commodity code
    3917400099 (opens in new tab)
    View ruling 600007472

  25. Ruling reference 600007289

    Description
    This product is a 2pc sink strainer set. The strainers are made of stainless steel and are for universal use. The product is packaged in a blister card.
    Keywords
    • OF BASE METALS
    • OF STAINLESS STEEL
    • SANITARY WARE
    • PUT UP FOR RETAIL SALE
    Expiry date
    14 Jun 2026
    Commodity code
    7324900090 (opens in new tab)
    View ruling 600007289
Is this page not working properly? (opens in new tab)