Information for ruling 600011119
This section is Advance Tariff Ruling
- Start date
- 28 Aug 2024
- Expiry date
- 27 Aug 2027
- Commodity code
- 7604210090 (opens in new tab)
- Description
- Aluminium Alloy SQ Corner Pillar 508mm – 708mm SQCNR 400mm / 600mm is as a part used in the assembly of a Lightweight Drop-side Trailer. Product Numbers & Specifications Aluminium Alloy SQ Corner Pillar SQCNR-400 / Aluminium Alloy SQ Corner Pillar SQCNR-600. Aluminium Alloy Grade 6063-T6: aluminium alloy, with magnesium and silicon as the alloying elements. It has generally good mechanical properties and is heat treatable and weldable. 6063 is the most common alloy used for aluminium extrusion. It allows complex shapes to be formed with exceptionally smooth surfaces fit for anodizing. T6 temper 6063 has an ultimate tensile strength of at least 190 MPa (28,000 psi) and yield strength of at least 160 MPa (23,000 psi). In thicknesses of 3.15 millimetres (0.124 in) or less, it has elongation of 8% or more; in thicker sections, it has elongation of 10%.
- Keywords
-
- OF BASE METALS
- HOLLOW
- OF ALUMINIUM
- OF METAL
- OF ALUMINIUM ALLOY
- PILLARS
- Justification
- Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)) General interpretative rules (GIR)s: GIR 1 has been used to classify this product by the terms of heading 7604: Aluminium bars, rods and profiles GIR 6 has been used to classify the goods to subheading level 760421: Of aluminium alloys; Hollow profiles 10 Digit code 7604210090: Other than hollow profile with: -one closed chamber of aluminium alloy 6063-t5 or 6060-t5, -a wall thickness of not more than 0.7 mm, and -an anodised layer of 10 µm at the surface, for use in the manufacture of board frames of whiteboards, cork boards, easel boards, education boards and display cases. Also classified in accordance with :- Note 3 to Section XV Harmonised Standard Explanatory Notes (HSENs) to heading – 7604