Information for ruling 600013177
This section is Advance Tariff Ruling
- Start date
- 03 Jun 2025
- Expiry date
- 02 Jun 2028
- Commodity code
- 7604210090 (opens in new tab)
- Description
- Hollow Aluminium Alloy Extrusion The product is a hollow aluminium extruded length in mill finish (as extruded). The aluminium profile is pasted by a protective PVC film on the flat surface with a decorative surface larger than 25mm, and each bundle is bundled with shrink film and loaded directly into the container. Length 5.80M x Width 34.5MM x Height 34.5MM The product is made of aluminium alloy 6063, The aluminium profile is obtained by extruding aluminium alloy 6063 billets, and the content of each element in each batch of aluminium billets is different. The ranges of chemical composition are standard requested ranges for each element. Chemical Composition as follows: Al (Aluminium) 97.5- 99.4 % Si (Silicon) 0.2-0.6% Fe (Iron) less than or equal to 0.35% Cu (Copper) less than or equal to 0.10% Mn (Manganese) less than or equal to 0.10% Mg (Magnesium) 0.45 - 0.9 % Cr (Chromium) less than or equal to 0.10% Zn (Zinc) less than or equal to 0.10% Ti (Titanium) less than or equal to 0.10 % Residuals less than or equal to 0.15% To be used in the construction of tables and benches in bespoke sizes, it will be cut to length, drilled and assembled.
- Keywords
-
- OF BASE METALS
- HOLLOW
- OF ALUMINIUM ALLOY
- PROFILES
- Justification
- Classification has been determined in accordance with the following: For the purposes of determining the commodity codes within which goods most appropriately fall, reg 3 (1) of The Customs Tariff (Establishment) (EU Exit) Regulations 2020 sets out that the rules of interpretation contained in the following have effect – a. Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom (Reg 3(1)(a)); and b. Notes to a section or chapter of the Goods Classification Table (Reg 3(1)(b)). GIR 1 has been used to classify this product by the terms of heading 7604: Aluminium bars, rods and profiles GIR 5(b) has been used to identify the type of packaging. GIR 6 has been used to classify the goods to subheading level 760421: Of aluminium alloys; Hollow Profiles 10 Digit code 7604210090: Other than hollow profile with: -one closed chamber of aluminum alloy 6063-t5 or 6060-t5, -a wall thickness of not more than 0.7 mm, and -an anodised layer of 10 µm at the surface, for use in the manufacture of board frames of whiteboards, cork boards, easel boards, education boards and display cases Also classified in accordance with: Section Note 3 to Section XV Section Note 5 to Section XV Section Note 9(b) to Section XV Subheading Note 1(b) to Chapter 76 Harmonized System Explanatory Note (HSEN's) to heading 76.04 Harmonized System Explanatory Note (HSEN's) to heading 74.07