Search for Advance Tariff Rulings

Ruling reference 600007279

Description: Product is two different shaped sets of 3 hourglasses. They are intended viewing/sensory stimulation. They are made from acrylic plastic, water and coloured oil. The coloured oil travels down through the hourglass to create a sensory viewing. Each style is a pack of three packaged in a box.
Keywords: SENSORY

OF ACRYLIC

OF WATER

OF PLASTIC

OF OIL

HOURGLASS
Expiry date: 18 Jun 2026
Commodity code: 3926909790 (opens in new tab)

View ruling 600007279

Ruling reference 600007278

Description: Product is a pack of 3 different coloured hourglasses. They are intended viewing/sensory stimulation. They are made from acrylic plastic, water and coloured sand. The coloured sand travels up through the hourglass to create a sensory viewing. The product is made in china and packaged in a box.
Keywords: SENSORY

OF ACRYLIC

OF WATER

OF PLASTIC

HOURGLASS

WITH SAND
Expiry date: 18 Jun 2026
Commodity code: 3926909790 (opens in new tab)

View ruling 600007278

Ruling reference 600007277

Description: Product is two sets of 15 wine bags with designs on them. Each pack of 15 will contain 5 designs and there will be 3 of each design. The bags are made of 210GSM paper and have a coloured rope handle made of fabric. The bags each measure 35cm x 13cm x 9cm. They are made in china and packaged as a set of 15 in a box.
Keywords: WITH TEXTILE MATERIAL

PUT UP FOR RETAIL SALE

OF PAPER

GIFT BAGS

BAGS
Expiry date: 18 Jun 2026
Commodity code: 4819400000 (opens in new tab)

View ruling 600007277

Ruling reference 600007276

Description: Product is fabric storage cube boxes. They are made from non woven fabric which has been made from polypropylene and has a base of cardboard wrapped in the fabric. They come in 2 different sizes (33 x33 x 37 cm or 27.5 x 27.5 x 28 cm) and come in 2 different colours (grey or cream). They are packaged in packs of 6 or 8. Made in China
Keywords: FOR STORAGE OF GOODS

OF NONWOVEN

OF TEXTILE MATERIAL

AS CUBES

OF MAN-MADE TEXTILE MATERIAL

OF POLYPROPYLENE
Expiry date: 18 Jun 2026
Commodity code: 6307909820 (opens in new tab)

View ruling 600007276

Ruling reference 600007226

Description: 2pc gravity chairs with 2pc small cup holders Folding reclining chairs and headrest with a metal frame and fabric seating The only assembly required is sliding the cup holders onto the chair poles once they are unfolded ready to sit. Made of: TEXTILENE FABRICS+STEEL TUBE Packing Style: CARDBOARD BOXING/ INSTRUCTION PAPER
Keywords: FOR THE GARDEN

WITH METAL FRAMES

CHAIRS

WITH RECLINING MECHANISM

GARDEN FURNITURE
Expiry date: 18 Jun 2026
Commodity code: 9401790000 (opens in new tab)

View ruling 600007226

Ruling reference 600007225

Description: 50pc alphabet beads with cord Beads are inserted onto the string to make a bracelet Made of: WOODEN Packing Style: POLYBAG WITH HEAD CARD
Keywords: WOODEN

BEADS

CRAFT KIT

ARTICLES OF WOOD
Expiry date: 18 Jun 2026
Commodity code: 4421999999 (opens in new tab)

View ruling 600007225

Ruling reference 600006928

Description: 8 piece hex key set made of 40 carbon steel. The sizes of these individual keys are 0.05 inches by 1.5 mm, 0.07 inches by 2 mm, 0.09 inches by 2.5 mm, 0.12 inches by 3 mm, 0.16 inches by 4 mm, 0.2 inches by 5 mm, 0.22 inches by 5.5 mm, and 0.24 inches by 6 mm. The packing style is a blister card.
Keywords: KEYS

HAND TOOLS

PUT UP FOR RETAIL SALE

OF METAL

OF STEEL
Expiry date: 18 Jun 2026
Commodity code: 8204110000 (opens in new tab)

View ruling 600006928

Ruling reference 600006925

Description: 2 piece stainless steel sink strainers. These sink strainers are suitable for sinks, basins and baths, and they help to prevent clogged drains. The packing style is a blister card.
Keywords: SINKS

PUT UP FOR RETAIL SALE

OF METAL

FOR SANITARY WARE

OF STAINLESS STEEL

OF BASE METALS
Expiry date: 18 Jun 2026
Commodity code: 7324900090 (opens in new tab)

View ruling 600006925

Ruling reference 600006849

Description: Non-usb mobile smartphone charger with a UK 3 pin mains plug. Product comprises of a sphere that charges the mobile phone connected to wall power socket. The device is compatible with only specific types of mobile phone as it has a wired 3.5mm connection. Input AC to DC 5 volts. Product dimensions: 102mm x 20.8mm. Weight 117g.
Keywords: MOBILE TELEPHONES

RECTIFIERS

ELECTRICAL PLUGS

OF PLASTIC

STATIC CONVERTERS
Expiry date: 18 Jun 2026
Commodity code: 8504408390 (opens in new tab)

View ruling 600006849

Ruling reference 600005131

Description: An analogue-addressable heat detector, incorporating short circuit isolation protection plus a range of heat detection modes. It utilises a thermistor of low thermal mass as its sensing element. This product and its variants cannot be used as stand-alone heat detectors: they must only be used as part of a Nittan Evolution protocol fire alarm control system & must only be connected using a suitable detector mounting base. This product comprises a polycarbonate (ABS type) plastic casing containing metal fasteners, screws and connectors plus a populated printed circuit board (PCB) with the thermistor sensing element attached plus an externally visible light-emitting diode (LED) attached (also connected to the PCB). This product offers a range of heat detection modes (A1R, A2S, BS & CS types), which are selectable by the fire alarm system control panel. The short circuit isolator feature of the EV-H2-SCI is intended only to isolate this device from the rest of its network in the event of a fault - it is not intended as a protective safety feature. The isolator will self-reset when the fault clears. The externally visible OmniView 360-degree LED fitted serves only to indicate when the detector is being queried by its fire alarm control system or is in alarm mode: it isn't intended as a visual warning of fire to any persons nearby and plays no part in the sensing function of this detector. No physical or chemical analysis is carried out by this product. This product is imported specifically for Nittan Europe Limited and cannot be resold as an "off the shelf" product in general stores nor by any non-specialist outlet. This product does not have an integral sounder or recording device and contains no audio-visual warning equipment. While it can be sold singly in its own small cardboard box, it will more commonly be despatched in larger cardboard boxes containing 10 or 100 units.
Keywords: FOR BUILDINGS

FOR DETECTION

SAFETY EQUIPMENT

WITHOUT SOUND SIGNALLING

SMOKE DETECTORS

OF PLASTIC
Expiry date: 18 Jun 2026
Commodity code: 8531103000 (opens in new tab)

View ruling 600005131

Ruling reference 600005130

Description: An analogue-addressable heat detector that utilises a thermistor of low thermal mass as their sensing element. It comprises a polycarbonate (ABS type) plastic casing containing a populated printed circuit board (PCB) with the thermistor sensing element and holder attached. It also contains metal screws, fasteners and connectors (terminals) plus an additional externally visible OmniView light-emitting diode (LED), which is also connected to the PCB. This detector and its variants cannot be used as stand-alone heat alarms: they must only be used as part of a Nittan Evolution protocol fire alarm control system and must only be connected via a suitable detector mounting base. The externally visible Omni View 360-degree LED serves only to indicate when the detector is being queried by its control panel or is in alarm mode; it isn't intended as a visual warning of fire to any persons nearby - the fire alarm system control panel to which it is linked triggers any warnings or other operations as necessary. This externally visible LED plays no part in the heat sensing function of this product. These products are imported specifically for Nittan Europe Limited and cannot be resold as an "off the shelf" product in general stores nor by any non-specialist outlet. This product does not have an integral sounder or recording device & contains no audio-visual warning equipment. While it can be sold singly in its own small cardboard box, it will more commonly be despatched in larger cardboard boxes containing 10 or 100 units.
Keywords: FOR BUILDINGS

FOR DETECTION

SAFETY EQUIPMENT

WITHOUT SOUND SIGNALLING

SMOKE DETECTORS

SENSORS

OF PLASTIC
Expiry date: 18 Jun 2026
Commodity code: 8531103000 (opens in new tab)

View ruling 600005130

Ruling reference 600005129

Description: The smoke detector incorporates short circuit isolation protection. It utilises the light scatter sensing principle, using a light emitting diode (LED) & a photo-diode within its sensing chamber. When smoke enters the sensing chamber, the photo-diode senses increased levels of infra-red light scattered by smoke particles; the sensor then goes into alarm mode. The short circuit isolator is intended only to isolate this device from the rest of its network in the event of a fault - it is not intended as a protective safety feature. The isolator will self-reset when the fault clears. This product comprises a polycarbonate (ABS) plastic casing containing metal fastenings & connecting terminals plus a populated circuit board with the sensing chamber attached to the PCB plus an additional externally visible Omni View LED attached (also connected to the PCB). The externally visible 360-degree Omni View LED fitted serves only to indicate when the detector is being polled by its control panel or to show that the detector is in alarm mode, it forms no part of the sensing function of this product and is not intended to act as a visual warning of fire to any persons in its vicinity. This product is not designed for the purposes of physical or chemical analysis - it is intended only to report an alarm condition upon the detection of smoke. It cannot be used on a stand-alone basis and does not have an integral sounder or recording device. While it can be sold singly in its own small cardboard box, it will more commonly be despatched in larger cardboard boxes containing 10 or 100 units.
Keywords: FOR BUILDINGS

FOR DETECTION

SAFETY EQUIPMENT

WITHOUT SOUND SIGNALLING

SMOKE DETECTORS

SENSORS

OF PLASTIC
Expiry date: 18 Jun 2026
Commodity code: 8531103000 (opens in new tab)

View ruling 600005129

Ruling reference 600005127

Description: The Nittan EV-PY is an analogue-addressable optical smoke detector, intended as a replacement for the earlier Nittan EV-P product. It utilises the light scatter sensing principle, using a light emitting diode (LED) & a photo-diode within its sensing chamber (now of the same optical sensing element design as for Nittan's EV-PYS product). The address of this product on its fire alarm system network is set using a Nittan EV-AD2-EXT hand-held address programmer. When smoke enters the sensing chamber, the photo-diode senses increased levels of infra-red light scattered by smoke particles; the sensor then goes into alarm mode. The product is similar in all respects to the existing Nittan EV-P product. This product comprises a polycarbonate (ABS) plastic casing containing metal fastenings & connecting terminals plus a populated circuit board with the sensing chamber attached to the PCB plus an additional externally visible OmniView LED attached (also connected to the PCB). The 360-degree OmniView LED fitted serves only to indicate when the detector is being polled by its control panel or to show that the detector is in alarm mode. it forms no part of the sensing function of this product & is not intended to act as a visual warning of fire to any persons in its vicinity. This product is not designed for the purposes of physical or chemical analysis - it is intended only to report an alarm condition upon the detection of smoke. This product cannot be used on a stand-alone basis: it must only be used as part of an analogue-addressable fire alarm control system using the Nittan Evolution communication protocol & must only be connected via a suitable detector mounting base. The versions listed in the confidential information section differ only in their identification labelling, which varies according to customer requirement; they are otherwise identical in design, appearance & functionality, all of which are similar to the Nittan EV-P product. The product is imported specifically for Nittan Europe Limited & cannot be resold as an "off the shelf" product in general stores or by any non-specialist outlet. This product does not have an integral sounder or recording device. While it can be sold singly in its own small cardboard box, it will more commonly be despatched in larger cardboard boxes containing 10 or 100 units.
Keywords: WITHOUT SOUND RECORDING DEVICE

SAFETY EQUIPMENT

SMOKE DETECTORS

FIRE ALARMS

LED

SENSORS

CIRCUIT BOARD

CONTROL PANEL

INFRARED SENSORS
Expiry date: 18 Jun 2026
Commodity code: 8531103000 (opens in new tab)

View ruling 600005127

Ruling reference 600005124

Description: The Nittan EV-PYH-SCI is a combined analogue-addressable optical smoke detector & heat sensor, incorporating short circuit isolation protection plus a range of heat detection modes. This product cannot be used on a stand-alone basis: it must only be used as part of an analogue-addressable fire alarm control system using the Nittan Evolution communication protocol & must only be connected to such a system via a suitable detector mounting base. The address of this product on its fire alarm system network is set using a Nittan EV-AD2-EXT hand-held address programmer. For smoke detection it utilises the light scatter sensing principle: using a light emitting diode (LED) & a photo-diode within its sensing chamber (now of the same optical sensing element design as for Nittan's EV-PYS product); for sensing of heat it uses a thermistor of low thermal mass. This product comprises a polycarbonate (ABS) plastic casing containing metal fasteners, screws & connecting terminals plus a populated printed circuit board (PCB) with the sensing elements above attached, plus an additional externally visible LED (also connected to the PCB). The short circuit isolator feature of the EV-PYH-SCI is intended only to isolate this device from the rest of its network in the event of a fault - it is not intended as a protective safety feature. The isolator will self-reset when the fault clears. The primary function of this product is the detection of smoke, hence the nomenclature applied for; but in addition this product offers a range of heat detection modes (A1R, A2S, BS & CS types), which are selectable by the fire alarm system control panel. The versions listed in the confidential information section differ only in their identification labelling, which varies according to customer requirement; they are otherwise identical in design, appearance & functionality, all of which are similar to the Nittan EV-PYH product. The external 360-degree Omniview LED serves only to indicate when the detector is being polled by its control panel or to show that the detector is in alarm mode: it forms no part of the sensing function of this product & is not intended to act as a visual warning of fire to any persons in its vicinity. This product is not designed for the purposes of physical or chemical analysis - it is intended only to report an alarm condition upon the detection of smoke and/or heat. This product is imported specifically for Nittan Europe Limited & cannot be resold as an "off the shelf" product in general stores nor by any non-specialist outlet. This product does not have an integral sounder or recording device. While it can be sold singly in its own small cardboard box, it will more commonly be despatched in larger cardboard boxes containing 10 or 100 units
Keywords: DETECTORS

FOR BUILDINGS

ANALOGUE

WITHOUT SOUND SIGNALLING

SMOKE DETECTORS

OF PLASTIC
Expiry date: 18 Jun 2026
Commodity code: 8531103000 (opens in new tab)

View ruling 600005124

Ruling reference 600005120

Description: A conventional optical smoke sensor which utilises the light scatter sensing principle: utilising an orange light-emitting diode (LED) and a photodiode within its sensing chamber. When the smoke enters this chamber, the photo-diode senses increased infra-red light scattered by the smoke particles and the detector then goes into alarm mode. This product comprises a polycarbonate ABS plastic casing containing metal fasteners, screws, and connectors plus a populated printed circuit board (PCB) with the sensing chamber, an insect protection mesh plus a further externally visible Omni View LED all attached (the sensing chamber and the further LED both also being connected to the PCB). The externally visible 360-degree Omni View LED serves only to indicate when the detector is in alarm mode - it forms no part of the sensing function of this detector which is not intended as a visual warning of fire to any persons nearby. The other similar version of this product differs only in its being a "zero ohm" resistance version, rather than the standard 375-ohm resistance of the previous model. In all other respects this product is identical in appearance and functionality. Both versions of this product are compatible only with UL-compliant fire alarm control systems must only be connected via a suitable, UL- compliant detector mounting base. There has been no change to the design, appearance or functionality of this product or its variants. The product is imported specifically for this company and cannot be resold as an "off the shelf" product in general stores or by any non-specialist outlet. This product does not have an integral sounder or recording device. Operating Voltage 12 VDC to 32 VDC, System Voltage 24 VDC and Dimensions φ104 mm x H 33 mm (Detector head only) φ104 mm x H 48 mm (Detector head and Base.) While the item can be sold singly in its own small cardboard box, it is more commonly dispatched in larger cardboard boxes containing 10 or 100 units.
Keywords: FOR BUILDINGS

ELECTRONIC

SAFETY EQUIPMENT

SMOKE DETECTORS

OF PLASTIC

LED
Expiry date: 18 Jun 2026
Commodity code: 85311030 (opens in new tab)

View ruling 600005120

Ruling reference 600005067

Description: An analogue- addressable photoelectric smoke detector. It detects smoke by the light scatter sensing principle, using a light emitting diode (LED) & a photo diode within its sensing chamber. This product is not designed for the purposes of physical or chemical analysis, just to report an alarm condition upon detection of smoke or heat. The primary function of this product is the detection of smoke, so does not have an integral sounder or recording device. The exterior LED serves only to indicate when the detector is being polled by its control panel or to show that the detector is in alarm mode. This product comprises of a plastic (ABS type) casing containing metal fastenings & connectors plus a populated printed circuit board with the sensing elements plus a dust protection mesh attached. This product cannot be used on a stand-alone basis: it can only be used as part of an analogue-addressable fire alarm control system. It can be sold singly in its own small cardboard box, but normally sold in larger cardboard boxes containing 10 or 100 units.
Keywords: FOR BUILDINGS

ANALOGUE

ELECTRONIC

SAFETY EQUIPMENT

SMOKE DETECTORS

LED
Expiry date: 18 Jun 2026
Commodity code: 85311030 (opens in new tab)

View ruling 600005067

Ruling reference 600007326

Description: This product is a a pad of paper sticky notes with a total of 90 sheets, in the colours blue and yellow and are ruled. Size of each sticky note is approx. 10.5cm x 10cm. The sticky notes come packaged in a polybag with a header card.
Keywords: OF PAPER

SELF-ADHESIVE

PADS

NOTE BOOKS
Expiry date: 15 Jun 2026
Commodity code: 4820103000 (opens in new tab)

View ruling 600007326

Ruling reference 600007325

Description: This product is blank self-adhesive labels in the colour white, they come in a pack of 10 sheets and have a total of 240 labels. Pack of labels is packaged in a polybag with a head card.
Keywords: OF PAPER

LABELS

SELF-ADHESIVE

WHITE
Expiry date: 15 Jun 2026
Commodity code: 4821901000 (opens in new tab)

View ruling 600007325

Ruling reference 600007298

Description: This product is 20pc of paper cut into shapes of people that are white in colour and measure at 13cm x 22.5cm. They come packaged in an OPP (Oriented polypropylene) bag, sealed with a head card.
Keywords: OF PAPER

CUT

WHITE

ARTS AND CRAFTS
Expiry date: 15 Jun 2026
Commodity code: 4823908580 (opens in new tab)

View ruling 600007298

Ruling reference 600007054

Description: A wall-mounted tv bracket with an arm, so that the TV can be moved into a suitable position when mounted on the wall. It is made from cold rolled iron plate.
Keywords: FOR TELEVISION SET

ADJUSTABLE

OF IRON

OF METAL

WALL HANGINGS

FOR HANGING UP

MOUNTED

FOR FIXING

WALL MOUNTED

BRACKETS
Expiry date: 15 Jun 2026
Commodity code: 7326909890 (opens in new tab)

View ruling 600007054

Ruling reference 600007044

Description: A wall mounted bicycle holder. It is used to hang a bicycle vertically to save space. It is made from iron and TPE (Thermoplastic Elastomer).
Keywords: WALL MOUNTED

FOR HANGING UP

HOOKS

OF STEEL

FOR BICYCLES
Expiry date: 15 Jun 2026
Commodity code: 7326909890 (opens in new tab)

View ruling 600007044

Ruling reference 600006334

Description: This is a food cover which opens up to the shape of an umbrella to place over food for protection against insects. It is made from a lightweight metal frame with netting constructed over the top. It opens up by a toggle at the top to keep it in place. The frame is made from 60% iron, the mesh is made from 30% polyester and the textile material is 10%; it is non-woven; it has a layer of lace at the bottom for decoration. It measures 30cm in length. It is folded for storage and packed in a plastic bag with a card header.
Keywords: FOR PROTECTION

NETTING

UMBRELLAS

OF POLYESTER

FRAMES
Expiry date: 15 Jun 2026
Commodity code: 5608191900 (opens in new tab)

View ruling 600006334

Ruling reference 600006271

Description: 9-piece key tags. Each tag is a polypropylene plastic cover holder that contains an insertable paper slip which allows the customer to add their information; they are then fastened with an iron key ring. The key tags are in three colours blue, red and yellow (3 of each). They are packaged with a cardboard information hanging tag in a plastic blaster pack.
Keywords: FOR LUGGAGE

LABELS

OF PLASTIC

AS RECTANGLES
Expiry date: 15 Jun 2026
Commodity code: 3926909790 (opens in new tab)

View ruling 600006271

Ruling reference 600007528

Description: A 200ml bottle of boot cleaner. This is water-based, deep-cleaning liquid which removes grime and restores appearance to all rugged leather and footwear types. Packaged in a plastic bottle.
Keywords: FOR CLEANING

FOR SHOES

MIXTURES

PUT UP FOR RETAIL SALE

WATER

BOOTS
Expiry date: 14 Jun 2026
Commodity code: 3402509000 (opens in new tab)

View ruling 600007528

Ruling reference 600007527

Description: A 100ml bottle of shoe deodoriser. This is a water-based shoe refresher spray which instantly absorbs odours and helps keep shoes fresher for longer. Packaged in a plastic bottle.
Keywords: FOR SHOES

AS SPRAY

ODORIFEROUS

PUT UP FOR RETAIL SALE

DEODORIZERS
Expiry date: 14 Jun 2026
Commodity code: 3307900000 (opens in new tab)

View ruling 600007527