Search for Advance Tariff Rulings

Ruling reference 600015176

Description: An embedded software-defined radio (SDR) transceiver designed for flexible radio-frequency signal reception, transmission, and real-time digital signal processing. The radio (SDR) transceiver operates over a wide frequency range of approximately 70 MHz to 6 GHz with up to 56 MHz of instantaneous bandwidth. The unit incorporates a Xilinx Zynq-7045 system-on-chip, combining a dual-core ARM processor and FPGA for on-device processing. This product supports standalone operation under embedded Linux or networked operation via Ethernet, and is programmable through standard SDR software frameworks. It can be used for a variety of RF applications, including general signal reception and transmission, spectrum monitoring, research, communications, and radar. In addition to this it is available in both 3U board-only and fully enclosed form factor variants.
Keywords: ELECTRONIC

SOFTWARE

RECEIVERS

TRANSCEIVER MODULES

WITH ETHERNET INTERFACE
Expiry date: 20 Apr 2029
Commodity code: 8517620000 (opens in new tab)

View ruling 600015176

Ruling reference 600014927

Description: A painted MDF veneered Christmas ornament in the shape of a house. The sample provided has a white roof with coloured circles on it. The chimney has a wooden shape depicting legs hanging out of it to give the illusion of Father Christmas going down the chimney. The words 'naughty' with a red curved line above it and 'nice' with a green curve line above it are printed above the door. On the front of the ornament in the centre is an arrow attached to plywood cogs which can be moved to point to either one of the printed words using the iron gold coloured key at the back of the ornament. The base of the ornament is painted red. Attached to the base is a red plaque that is outlined in white, there is a girl’s name together with the words ‘daily report’ in white printing in the centre of the plaque. The ornament stands approximately 13cm in height, the base is approximately 11.5cm in length and 4cm in width.
Keywords: ARTICLES OF WOOD

CHRISTMAS ORNAMENT

OF WOOD

CHRISTMAS ARTICLES

FESTIVE DESIGN

OF PLYWOOD

MDF

PUT UP FOR RETAIL SALE

PERSONALISED

CHRISTMAS DECORATION
Expiry date: 20 Apr 2029
Commodity code: 9505109000 (opens in new tab)

View ruling 600014927

Ruling reference 600014922

Description: A Christmas tree decoration made from rPET (Recycled Polyethylene Terephthalate). The sample received is a flat fretwork plastic hanging decoration in the shape of a bauble with a pointed end. It is approximately 9.5cm in height and 7.5cm in width. The decoration is white in colour, within the middle of the decoration is a sticker with a boy’s name printed on it, 5 small glass crystals are attached to the decoration. There is an organza ribbon attached at the top of the decoration to enable the item to hang. It is packaged within a paper box, inside is an EVA (Ethylene-vinyl acetate) backing and a paper sleeve depicting a festive message. The paper box in then placed within a biodegradable plastic bag for retail sale.
Keywords: ORGANZA

RPET

PUT UP FOR RETAIL SALE

OF PLASTIC

WITH RIBBON

CHRISTMAS ARTICLES

FOR DECORATION

CHRISTMAS TREE DECORATIONS

RECYCLED POLYETHYLENE TEREPHTHALATE

FOR HANGING

PERSONALISED
Expiry date: 20 Apr 2029
Commodity code: 9505109000 (opens in new tab)

View ruling 600014922

Ruling reference 600015407

Description: Frozen Pad Thai Spring Rolls and Frozen Hoisin Duck Spring Rolls .The products are supplied frozen in sealed plastic foodservice bags and outer cartons suitable for frozen storage and distribution Ingredients: Pad Thai Spring Rolls Pad Thai Sauce brown Sugar light soy sauce water chilli flakes tamarind paste lime juice frozen diced mushrooms ginger puree nuggets miso garlic salt lime leaves lemongrass galangal sesame seed oil dark soy sauce Potato starch Pad Thai Spring Roll Pastry Diced Green Beans Shredded Carrots Sliced/Shredded Cabbage Rice Vermicelli Noodles Sliced Onion Pad Thai Sauce
Keywords: PUT UP FOR RETAIL SALE

BROWN SUGAR

SPRING ROLLS

FOOD PREPARATION

DUCK MEAT

WHEAT FLOUR

VEGETABLES
Expiry date: 19 Apr 2029
Commodity code: 1905908000 (opens in new tab)

View ruling 600015407

Ruling reference 600015356

Description: The material consists of sealed lithium-ion battery cells produced during lithium-ion battery manufacturing that have been rejected due to a welding defect during the cell assembly process and therefore cannot be used in battery assembly or further manufacturing operations. The cells are fully assembled and enclosed within their metal casing but have not been filled with electrolyte and therefore have never been activated. Internally the cells contain the standard components of a lithium-ion battery including stacked cathode and anode electrodes separated by a microporous polyolefin separator. The cathode consists of aluminium foil coated with lithium iron phosphate (LFP) active material. The LFP is combined with conductive carbon additives (typically carbon black) and a polymer binder which adheres the coating to the aluminium foil current collector. The anode consists of copper foil coated with graphite active material. The graphite is combined with conductive carbon additives and a polymer binder which secures the coating to the copper foil current collector. The electrodes are separated by a thin polyethylene (PE) or polypropylene (PP) separator film. As the cells do not contain electrolyte they are electrically inactive and cannot function as batteries. As a result, the material does not present the risks normally associated with active lithium-ion batteries and is not considered a fire risk.
Keywords: NOT PUT UP FOR RETAIL SALE

CARBON BLACK

COATED

ALUMINIUM FOIL

ELECTRONIC COMPONENTS

FOILS

CASINGS

WASTE OR SCRAP

ELECTRONIC

COPPER WASTE AND SCRAP

GRAPHITE

DRY CELLS

CONTAINING LITHIUM
Expiry date: 19 Apr 2029
Commodity code: 8549990000 (opens in new tab)

View ruling 600015356

Ruling reference 600015327

Description: This product is a hot tub pillow (headrest) that is made of cross-linked polyethylene/EVA. The headrest is solid as it is a complete moulded unit and attaches to the hot tub via plastic clips that are not supplied with the headrest but come fitted to the hot tub shell to which the headrest fits over the clips to hold it into place. The headrest is designed to give a bather a comfortable place to rest their head, and is available in different sizes, shapes and colours to fit different hot tub models. When supplied separately the headrests are packaged in a plastic bag, and then placed in a cardboard box for shipping.
Keywords: HEADRESTS

OF PLASTIC

PILLOWS

PUT UP FOR RETAIL SALE
Expiry date: 19 Apr 2029
Commodity code: 9404909000 (opens in new tab)

View ruling 600015327

Ruling reference 600015322

Description: A handheld electronic test instrument designed to identify and characterise discrete semiconductor devices whilst out of circuit. It automatically detects device type, including bipolar junction transistors, MOSFETs, JFETs, diodes, and diode networks, without requiring prior pin configuration. After analysis, the instrument displays pinout identification and key electrical parameters such as junction voltage, current gain (hFE), threshold voltage, and leakage current where applicable. The unit uses three test leads connected directly to the device under test and presents results on an integrated LCD. It is battery powered and supplied in a cardboard box with an instruction manual
Keywords: WITH DISPLAY

ELECTRONIC

FOR TESTING

FOR ANALYSIS

FOR MEASURING ELECTR. QUANTITIES

CHECKING INSTRUMENTS
Expiry date: 19 Apr 2029
Commodity code: 9030820000 (opens in new tab)

View ruling 600015322

Ruling reference 600015304

Description: A slurry mixture of Lithium Ion Phosphate (LiPO4), with additional Carbon Black, and binder mixed with water. The slurry is used in the manufacture of battery cathodes (electrodes). The product is in the form of a viscous fluid.
Keywords: AS LIQUID

LITHIUM

IRON

INORGANIC COMPOUNDS

PHOSPHATES

CONTAINING CARBON BLACK
Expiry date: 19 Apr 2029
Commodity code: 2842902000 (opens in new tab)

View ruling 600015304

Ruling reference 600015031

Description: The kit can an be used with wireless controllers for gaming consoles. The kit includes a 10-foot cable to play with the controllers while charging, 2 rechargeable 1200maH Ni-MH battery packs and 4 ABS plastic battery door covers. The kit enables 20 hours of gameplay per charge. The kit is also compatible with other charging systems which are sold separately. The batteries have LED indicator lights that move while charging and show a solid colour when fully charged.
Keywords: ACCUMULATORS

KITS

PUT UP FOR RETAIL SALE

USB CABLESUSB CONNECTORS

RECHARGEABLE, BATTERIES

BATTERIES
Expiry date: 19 Apr 2029
Commodity code: 8507500090 (opens in new tab)

View ruling 600015031

Ruling reference 600015492

Description: A food preparation in powder form to be consumed with water Ingredients: Dextrose Monohydrate, Maltodextrin, Creatine Monohydrate, Amyral Waxy Maize, Fructose, Glycine, Taurine, Acidity Regulator (Citric Acid), Flavouring, Potassium Chloride, Colour (Quinoline Yellow, Sunset Yellow^), Sweetener (Acesulfame K) Packaged in a plastic container, 960g
Keywords: FOOD SUPPLEMENTS

WITH MALTODEXTRINE

AS POWDER

DEXTROSE

MIX WITH WATER

CREATINE

SUCROSE
Expiry date: 16 Apr 2029
Commodity code: 2106909849 (opens in new tab)

View ruling 600015492

Ruling reference 600015355

Description: The material consists of stacked lithium-ion battery electrodes produced during lithium-ion battery cell manufacturing as a quality reject prior to cell assembly. The material comprises alternating layers of cathode and anode electrodes separated by a thin microporous polymer separator film. The separator is typically composed of polyethylene (PE), polypropylene (PP), or a multilayer polyolefin structure (e.g. PP/PE/PP), with a typical thickness in the range of approximately 10–25 microns. The material is dry and does not contain electrolyte. The stacked electrode material therefore consists of layered aluminium foil cathodes coated with lithium iron phosphate active material and copper foil anodes coated with graphite active material, separated by a thin polyolefin separator film. The cathode sheets consist of aluminium foil coated with lithium iron phosphate (LFP) active material. The LFP is combined with a conductive additive (typically carbon black) and a polymer binder which adheres the coating to the aluminium foil current collector. The anode sheets consist of copper foil coated with graphite active material. The graphite is combined with conductive carbon additives and a polymer binder which secures the coating to the copper foil current collector. Packaging - the material is bagged and stacked on a pallet.
Keywords: NOT PUT UP FOR RETAIL SALE

COATED

ALUMINIUM FOIL

ELECTRONIC COMPONENTS

FOILS

CONTAINING LITHIUM

ELECTRODES

WASTE OR SCRAP

ELECTRONIC

COPPER WASTE AND SCRAP

GRAPHITE
Expiry date: 16 Apr 2029
Commodity code: 8549990000 (opens in new tab)

View ruling 600015355

Ruling reference 600015292

Description: The HVAC are designed to provide temperature control and air circulation management in vehicles. • They are used for cooling, heating, and ventilation in commercial vehicles, buses, off-road vehicles, and civil/specialist applications. The systems include components such as evaporators, condensers, compressors, refrigerant hoses, mounting brackets, and electrical harnesses. Materials used are typically metals (aluminium, steel), plastics, rubber (for hoses), and electrical wiring. The Kits are assembled to ensure compatibility with specific vehicle models, either as full standalone systems or as "tap in" solutions that integrate with existing vehicle climate systems. The system circulates refrigerant through evaporators and condensers to absorb and release heat, cooling or heating the vehicle interior. Electrical harnesses connect the system to vehicle power and controls. "Tap in" solutions use the vehicle’s existing climate system, while full systems include all necessary components for independent operation.
Keywords: FOR COOLING

FOR HEATING

TEMPERATURE REGULATORS

AIR CONDITIONING EQUIPMENT

FOR MOTOR VEHICLES
Expiry date: 16 Apr 2029
Commodity code: 8415200090 (opens in new tab)

View ruling 600015292

Ruling reference 600014928

Description: A card wallet with a metal zip closure. The outer surface is made from polyurethane, the lining is made from polyester. The sample provided has a dark blue exterior with a marble effect pattern in the colours blue, red and white. On the front there is a gold printed circle with the letter T printed in gold within the centre. On the reverse are 4 slots to hold cards. The zip is gold in colour, once opened the lining is blue in colour.
Keywords: CREDIT CARD HOLDERS

PUT UP FOR RETAIL SALE

OUTER SURFACE

OF POLYURETHANE

PURSES

WALLETS

WITH ZIP FASTENER

OF POLYESTER

PU LEATHERETTE

WITH PLASTIC SHEETING
Expiry date: 16 Apr 2029
Commodity code: 4202321000 (opens in new tab)

View ruling 600014928

Ruling reference 600015587

Description: Table Lamp A table lamp for supplying light therapy during the darker months of the year. It is a class 2a medical device for the alleviation of Seasonal Affective Disorder (SAD)symptoms. The lamp is constructed from injection moulded ABS and moulded PC plastics, with an aluminium reflector and 3 Compact Fluorescent lamps consisting of 2 parallel tubes, 36W each, with 4-pin 2G11 Cap Base. It is designed for use on a table or other raised surface, controlled by an on / off push button, and powered by an AC mains power supply (230V/50Hz/55W). The lamp is sold to retail and consumers. It is packaged in single-face cardboard with EPE (plastic) internal packaging. Dimensions is 31cm (width) x 15cm (depth) x 50cm (height).
Keywords: ELECTRIC

TABLE LAMPS

OF ALUMINIUM

FLUORESCENT TUBES

POLYCARBONATES

ABS

FOR HEALTH USE

REFLECTORS
Expiry date: 15 Apr 2029
Commodity code: 8543709099 (opens in new tab)

View ruling 600015587

Ruling reference 600015586

Description: LED Table Light An LED table light intended for the treatment of Seasonal Affective Disorder (SAD), and to promote mental health and wellbeing during winter months. The product is powered by an external detachable AC/DC, constant current power supply and has one simple on/off switch. Manufactured from standard ABS, aluminium and polycarbonate materials, with a small amount of thermoplastic elastomer. Measurements are 28cm Height and Depth 3cm and Width 20cm.
Keywords: ELECTRIC

TABLE LAMPS

OF ALUMINIUM

LED LAMPS

POLYCARBONATES

THERMOPLASTIC ELASTOMER

ABS

FOR HEALTH USE
Expiry date: 15 Apr 2029
Commodity code: 8543709099 (opens in new tab)

View ruling 600015586

Ruling reference 600015585

Description: Multifunctional LED Light Therapy Solution It’s primary purpose (Day mode) is to offer treatment for Seasonal Affective Disorder (SAD) by simulating sunlight to improve mood, energy, focus, and performance. The light operates in day mode and evening mode. Evening mode allows you to switch off and unwind. The product is powered with an external AC/DC power supply and cannot be functioned if not plugged in. The product is constructed using standard ABS, Polycarbonate, PMMA, Steel, aluminium alloy, and silicone materials. The approximate size of the product is 330mm x 197mm x 324mm.
Keywords: POLYMETHYL METHACRYLATE

LED LAMPS

POLYCARBONATES

OF STEEL

ABS

FOR HEALTH USE

OF ALUMINIUM ALLOY

OF SILICONE

ELECTRIC
Expiry date: 15 Apr 2029
Commodity code: 8543709099 (opens in new tab)

View ruling 600015585

Ruling reference 600015584

Description: LED Table Light A LED table light designed to treat Seasonal Affective Disorder (SAD). The product is powered with an external detachable AC/DC power supply and has one simple on/off switch. The product is constructed using standard ABS, aluminium and polycarbonate materials. Material Percentages ABS 41% PMMA 39% Aluminium 15% Other 5%
Keywords: ELECTRIC

TABLE LAMPS

OF ALUMINIUM

LED LAMPS

POLYCARBONATES

ABS

FOR HEALTH USE
Expiry date: 15 Apr 2029
Commodity code: 8543709099 (opens in new tab)

View ruling 600015584

Ruling reference 600015564

Description: Fibre Optic Dust-proof Adapters which have a dust shutter to prevent dust particles interfering with the high-power laser signals (beams) that pass through them when in operation. They are used in Fibre Optics Telecoms routing apparatus (wired or wireless networks). Used inside apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network (such as a local or wide area network). They are also used inside machines for the reception, conversion and transmission or regeneration of voice , images or other data, including switching and routing apparatus. They act as a docking station, featuring internal alignment of sleeves to precisely mate the connectors and are used in patch panels, wall outlets, and equipment to join different cable types or extend connection. Fibre Optic “Connectors” are physically attached to optical fibre cables and they use matching size & shape “Adapters” to be joined and function in Telecoms apparatus in Fibre Optic network applications. Fibre optic connectors and adapters are the essential hardware used to join optical fibres, allowing light to pass through with minimal interruption. Connectors are the "plugs" at the ends of fibre cables, while Adapters (also called couplers) are the "sockets" that align and hold two connectors together. Fibre optic Adapters are designed to connect two fibre optic cables together. Dust shutter Adapters are dust-proof clean and ensure precise alignment of the fibre cores so that light can jump from one cable to the next without loss.
Keywords: ADAPTERS

FOR TELECOMMUNICATIONS

DUST EXTRACTORS

FOR OPTICAL FIBRE CABLES
Expiry date: 15 Apr 2029
Commodity code: 8517620000 (opens in new tab)

View ruling 600015564

Ruling reference 600015406

Description: Squeaky meat dog toy. Made from vinyl plastic. Available in a variety of meat cuts and is suitable for all types of dogs. Presented on a printed cardboard card designed for hanging for retail sale.
Keywords: OF VINYL

OF PLASTICS

DOG TOY

FOR ANIMALS

TOYS
Expiry date: 15 Apr 2029
Commodity code: 3926909790 (opens in new tab)

View ruling 600015406

Ruling reference 600015405

Description: Dumbbell-shaped squeaky dog toy. Made from vinyl plastic. Available in various colours and is suitable for all types of dogs. Measuring approx. 18cm. Presented on a printed cardboard card designed for hanging for retail sale.
Keywords: OF VINYL

OF PLASTICS

DOG TOY

FOR ANIMALS

TOYS
Expiry date: 15 Apr 2029
Commodity code: 3926909790 (opens in new tab)

View ruling 600015405

Ruling reference 600015404

Description: Squeaky hot dog toy. Made from vinyl plastic. Suitable for all types of dogs. Measuring approx. 14cm.
Keywords: OF VINYL

OF PLASTICS

DOG TOY

FOR ANIMALS

TOYS
Expiry date: 15 Apr 2029
Commodity code: 3926909790 (opens in new tab)

View ruling 600015404

Ruling reference 600015403

Description: Chicken leg shaped squeaky dog toy. Made from vinyl plastic. Suitable for all types of dogs. Measuring approx. 16cm.
Keywords: TOYS

FOR DOGS

OF VINYL

OF PLASTICS

DOG TOY

PET TOYS
Expiry date: 15 Apr 2029
Commodity code: 3926909790 (opens in new tab)

View ruling 600015403

Ruling reference 600015335

Description: Road traffic signs - Give way to oncoming vehicles supplementary plate Size 750mm x 360mm Silk printing is used to apply ink via a mesh stencil and squeegee. Made from 50% recycled ABS plastic and 50% virgin HDPE material. Silk screen printing produces crisp, vibrant images that remain clear over time, making the sign highly visible to road users. The blend of recycled ABS and virgin HDPE gives the sign strength while promoting sustainability and environmental responsibility. These signs are used for regulatory, informational, or warning purposes on highways and urban streets Packaged in cartons
Keywords: SIGNS

OF PLASTIC

HDPE

ABS

PRINTED

FOR SAFETY
Expiry date: 15 Apr 2029
Commodity code: 4911990000 (opens in new tab)

View ruling 600015335

Ruling reference 600015334

Description: Road traffic signs - Single File Traffic Supplementary Plate. Size 750mm x 300mm Silk printing is used to apply ink via a mesh stencil and squeegee. Made from 50% recycled ABS plastic and 50% virgin HDPE material. Silk screen printing produces crisp, vibrant images that remain clear over time, making the sign highly visible to road users. The blend of recycled ABS and virgin HDPE gives the sign strength while promoting sustainability and environmental responsibility. These signs are used for regulatory, informational, or warning purposes on highways and urban streets Packaged in cartons
Keywords: SIGNS

OF PLASTIC

HDPE

ABS

PRINTED

FOR SAFETY
Expiry date: 15 Apr 2029
Commodity code: 4911990000 (opens in new tab)

View ruling 600015334

Ruling reference 600015333

Description: Road traffic signs sized 750mm x 285mm use silk printing to apply ink via a mesh stencil and squeegee. They are made from 50% recycled ABS plastic and 50% virgin HDPE material. Silk screen printing produces crisp, vibrant images that remain clear over time, making them highly visible to road users. The blend of recycled ABS and virgin HDPE gives the signs strength while promoting sustainability and environmental responsibility. Typically, these signs are used for regulatory, informational, or warning purposes on highways and urban streets The printed signs are: End Supplementary Plate Arrow Supplementary Plate 100 yds supplementary plate (black on white) 200 yds supplementary plate (black on white) 300 yds supplementary plate (black on white) 400 yds supplementary plate (black on white) 100 yds supplementary plate (black on yellow) 200 yds supplementary plate (black on yellow) 300 yds supplementary plate (black on yellow) 400 yds supplementary plate (black on yellow) Packaged in cartons
Keywords: SIGNS

OF PLASTIC

HDPE

ABS

PRINTED

FOR SAFETY
Expiry date: 15 Apr 2029
Commodity code: 4911990000 (opens in new tab)

View ruling 600015333