Search for Advance Tariff Rulings

Ruling reference 600012861

Description: Single Mode fibre optic cables. A Single Mode cable made from Bare Fibres, Aramid Yarn, and DCA pellets. Made by firstly preheating the optical fibres, coating, and colouring to protect the bare fibres and ensure their mechanical and physical properties. Then, a layer of protective material such as polyvinyl chloride or low-smoke halogen-free is applied to provide secondary protection against external damage. Multiple tightly bundled fibres are then grouped together and covered with a high-modulus non-metallic reinforcing layer and sheath material for double protection, enhancing the tensile strength and service life of the cable. A light travels down a fibre optic cable by bouncing repeatedly off the walls. If the light hits glass at a shallow angle (less than 42 degrees), it reflects back in again this keeps light inside the pipe. To send a signal through a fibre optic cable, a laser at one end of the pipe switches on and off to send each bit of data. Modern fibre systems with a single laser can transmit billions of bits per second. The laser can turn on and off several billions of times per second. Packaged in a plain polybag with a label.
Keywords: FOR OPTICAL FIBRE CABLES

PROTECTIVE CASINGS

CABLES

FOR NETWORKS

FOR TRANSMISSION OF SIGNALS
Expiry date: 05 May 2028
Commodity code: 8544700099 (opens in new tab)

View ruling 600012861

Ruling reference 600012667

Description: Panel consisting of silicon aerogel with heat treated mineral fibres. Aerogels are used for insulation due to their low density and thermal insulating properties. Aerogel is composed of amorphous silica, a non-crystalline form of silicon dioxide. Panels are presented in wrapped roll of approximate 575 square foot.
Keywords: MINERAL PRODUCTS

AS PANELS

AS ROLLS

INSULATION MATERIAL

CONTAINING SILICA

FIBRES

FOR INSULATION
Expiry date: 05 May 2028
Commodity code: 6806900000 (opens in new tab)

View ruling 600012667

Ruling reference 600012649

Description: The fibrinogen degradation product (FDP) control reagent, is used to monitor the accuracy of an FDP test, it is typically a commercially prepared solution containing a known concentration of fibrin degradation products, often used in a latex agglutination assay format, which allows for the visual assessment of the test's performance by comparing the reaction of the control to a positive and negative control on the same test kit; this helps ensure the assay is working correctly and can accurately detect FDPs in patient samples. Key points about FDP control reagents: The FDP Control Contains 0.0500% w/w Human Serum and 1-5 % BSA. Function: Is to verify the accuracy of an FDP test by providing a reference point for interpreting patient results. Composition: Contains a known concentration of fibrin degradation products. Testing method: It can be used in conjunction with a latex agglutination assay where visible agglutination indicates the presence of the FDPs product, it is contained in 3ml glass vial and packaged in a cardboard box.
Keywords: AS LIQUID

DIAGNOSTIC REAGENTS

REAGENTS

PREPARED

FOR ANALYSIS

FOR LABORATORY USE
Expiry date: 05 May 2028
Commodity code: 3822190090 (opens in new tab)

View ruling 600012649

Ruling reference 600012648

Description: The product is an FDP Calibrator set used to accurately calibrate a laboratory instrument that measures Fibrinogen Degradation Products (FDP) levels in a patient's blood sample, allowing for precise determination of FDP concentration by creating a reference curve against unknown samples are compared; this is crucial for diagnosing conditions and monitoring treatment efficacy. Key points about FDP Calibrator Sets: The FDP calibrator Contains 0.0500% w/w Human Serum and 1-5 % body surface area. Function: It contains known concentrations of FDP, allowing the instrument to establish a reliable relationship between the measured signal and the actual FDP level in a sample. Clinical application: It is used in conjunction with an FDP test kit to diagnose conditions associated with elevated FDP levels, such as deep vein thrombosis (DVT), pulmonary embolism (PE), and Disseminated intravascular coagulation (DIC). Calibration process: The calibrator set includes 5 vials with known FDP concentrations, which are run on the instrument to generate a calibration curve. Quality control: The regular use of the FDP calibrator sets ensures the accuracy and reliability of FDP measurements on a laboratory instrument. The set includes 5 different concentrations packaged in 3ml glass vials, placed in a cardboard box.
Keywords: AS LIQUID

DIAGNOSTIC REAGENTS

REAGENTS

PREPARED

FOR ANALYSIS

FOR LABORATORY USE
Expiry date: 05 May 2028
Commodity code: 3822190090 (opens in new tab)

View ruling 600012648

Ruling reference 600012643

Description: The product is an HDL-Cholesterol Calibrator, which is a lyophilised human serum calibrator. It contains 26.7% Human Serum. The HDL (High-Density Lipoprotein) cholesterol is used to accurately calibrate a laboratory instrument. By measuring the HDL levels in a blood sample, ensuring the results are precise and reliable, by providing a reference point against. The test readings are compared; essentially acting as a standard to check the accuracy of the HDL test on a machine. Function: For an HDL test, a small amount of calibrator solution is analysed by the machine first, allowing the instrument to adjust its readings based on the known HDL concentration of the calibrator, ensuring accurate results for patient samples. Preparation: HDL calibrators are usually supplied as a lyophilized (freeze-dried) powder that needs to be reconstituted with a specific volume of distilled water before use. The HDL calibrators are used as a quality control measure in clinical laboratories. The product is packaged in a 3ml glass vial in a pack of 3 or 100, stored in a cardboard box.
Keywords: AS LIQUID

DIAGNOSTIC REAGENTS

REAGENTS

PREPARED

FOR ANALYSIS

FOR LABORATORY USE
Expiry date: 05 May 2028
Commodity code: 3822190090 (opens in new tab)

View ruling 600012643

Ruling reference 600012917

Description: The item is a cubic box used for domestic storage. The item is made from polyethylene terephthalate non-woven polyester fabric, sown into envelopes with cardboard stiffening board to form side and bottom. When sides expanded the base can be pushed to the bottom of the cube forming a free standing, open topped cube. Each cube, when expanded measures 33x33x37cms. Packed loose in 90 pieces in a carton.
Keywords: OF NONWOVEN

OF TEXTILE MATERIAL

OF POLYPROPYLENE

OF MAN-MADE TEXTILE MATERIAL

AS CUBES

FOR STORAGE OF GOODS
Expiry date: 03 May 2028
Commodity code: 6307909820 (opens in new tab)

View ruling 600012917

Ruling reference 600013048

Description: A man's heavy duty, high visibility ripstop tool vest .This has multiple pockets for convenience at work. Two double pockets accessed from the top with zip and hook and loop closure. Double D rings. Chest pockets with flap closure and pulls. ID card display. Adjustable hem with two press buttons. Individually bagged, imported in boxes of 50.
Keywords: HIGH VISIBILITY

OF POLYESTER

TEXTILE ARTICLES

FOR MEN

TEXTILES AND TEXTILE ARTICLES

WOVEN
Expiry date: 01 May 2028
Commodity code: 6211339000 (opens in new tab)

View ruling 600013048

Ruling reference 600013020

Description: The product is a jewellery display box, made from medium density fibreboard (MDF). Construction is Medium Density Fibreboard (60%), Polyester Lining (18%), Polyurethane Outer Surface (18%), Sponge (4%). The jewellery box has a deep layer, which has individual compartments to display the jewellery. Also includes a logo in the inside of the box.
Keywords: FOR JEWELLERY

STORAGE

BOXES

WOOD

CASES

MDF

PUT UP FOR RETAIL SALE
Expiry date: 01 May 2028
Commodity code: 4420909990 (opens in new tab)

View ruling 600013020

Ruling reference 600012931

Description: The garden cupboard is an ideal storage solution for garden equipment. With its stylish wood-look design, 880L capacity and durable, weather-resistant construction, it is built to last. It includes built-in ventilation, a sloped floor to protect contents against mud and rainwater and a built-in support for you to add your own shelf. Convenient opening from the top or front and a step-on lock makes access easy when you need it. It can hold 2 x 120L bins. Made of plastic resin Capacity 880L. Lockable. External size H113.5, W132, D71.5cm. Internal size H108.8, W122, D61cm. Weight 18kg.
Keywords: FURNITURE

FOR THE GARDEN

OF PLASTIC

FOR STORAGE OF GOODS

GARDEN FURNITURE
Expiry date: 01 May 2028
Commodity code: 9403700000 (opens in new tab)

View ruling 600012931

Ruling reference 600012928

Description: 2-seater faux rattan-effect bistro set. Used for garden seating. The set is made from polyethylene and resin. Sturdy seatbacks and armrests are paired with cushions for comfort and durability, while the stylish graphite colour scheme is sure to complement your garden or patio. The table features a smooth, slatted table top and lift the lid of the table to reveal storage for cushions and garden equipment. The cushions are included. You need to remove the seat pads for a weather-resistant set that can be left outside all year round. Consider covering in extreme conditions. Garden table features: Resin table top. Storage included in: table - 50L total storage capacity. Table size: H43, W39, L39cm. Chair features: Chair seat and back made from rattan effect. Size H89, W62, D60cm. Seat height 41.6cm. 110kg maximum user weight per chair. Cushion features: Polyester and Light Grey cushions. Removable covers. Washable covers. Remove cushions when not in use and store inside. Packaged in bags/boxes.
Keywords: OF PLASTIC RESIN

FOR THE GARDEN

GARDEN FURNITURE

POLYETHYLENE

TABLES

FOR SITTING

SEATS
Expiry date: 01 May 2028
Commodity code: 9401800000 (opens in new tab)

View ruling 600012928

Ruling reference 600012895

Description: Solid wooden floor made of oak.
Keywords: FOR FLOORING

OF WOOD

WOOD
Expiry date: 01 May 2028
Commodity code: 4407913100 (opens in new tab)

View ruling 600012895

Ruling reference 600012885

Description: A 12V analogue air compressor used for inflating vehicle tyres, inflatables or balls. It has 0-120 PSI, 0-8 BAR and the flow is 26.7L per minute. The air compressor comes with a 450ml bottle of tyre sealant, which is made from propylene glycol, natural rubber latex, and polyethylene glycol 1100 mono ethers. They are put up for retail sale as a set and are supplied together in a storage bag and packaged in a retail box.
Keywords: AIR COMPRESSORS

WITH STORAGE BAG

NATURAL RUBBER LATEX

FOR PNEUMATIC TYRES

PROPYLENE GLYCOLS

AIR PUMPS

PACKAGED AS A SET

SEALANTS

POLYETHYLENE GLYCOL

GOODS PUT UP IN SETS
Expiry date: 01 May 2028
Commodity code: 8414808090 (opens in new tab)

View ruling 600012885

Ruling reference 600012884

Description: Erail is a tracking system for curtains and scenery. The track is an aluminium extrusion and utilises steel components fitted with ball raced capstans and pulleys and features ball raced carriers. 12-wheel master runner is used on straight and curved tracks, taking curves as tight as a 500 mm radius and curtains as tall as 8 m. Each joint set comprises two flat plates with four countersunk socket screws that fit into and over the tee slot and one roll pin. External dimensions are 25 mm wide x 37 mm high. The extrusion is comprised of an I beam lower section with tee slot above. The tee slot accepts an M8 channel nut to suspend the track from the various mounting brackets, hook clamps and studding options. The track system is packaged with cardboard boxes, paper void fill, cardboard edging for the track and black wrap.
Keywords: ALUMINIUM

RAILS

TRACK

OF BASE METALS

CURTAINS
Expiry date: 01 May 2028
Commodity code: 8302419000 (opens in new tab)

View ruling 600012884

Ruling reference 600012870

Description: The product is a pack of four rectangle armrest cushions, available in assorted colours and used around the home for decoration and lounging, particularly by children. Dimensions of cushions are 14cm x 14cm x 84cm each. The cushions are covered with a water and strain resistant micro suede fabric that can be removed for machine washing. The cushions are vacuum compressed and rolled for packaging and shipped in a cardboard box.
Keywords: FILLED

PUT UP FOR RETAIL SALE

FABRIC

WITH ZIP FASTENER

CUSHIONS

FOR CHILDREN
Expiry date: 01 May 2028
Commodity code: 9404909000 (opens in new tab)

View ruling 600012870

Ruling reference 600012869

Description: The product is a children’s play sofa, made up of eight cushions without a frame and comes in variety of colours. The cushions can be reconfigured into various positions and can be used as a bed. The cushion shapes are two rectangle base cushions, two triangle backrest cushions, and two circle decorative cushions. The sofa is vacuum compressed and rolled for packaging and shipped in a cardboard box.
Keywords: CONVERTIBLE

AS PROFILE SHAPES

BEDS

FOR CHILDREN

OF FOAM

CUSHIONS

SEATS
Expiry date: 01 May 2028
Commodity code: 9404909000 (opens in new tab)

View ruling 600012869

Ruling reference 600012695

Description: Sterilant concentrate Two-part cup system which is inserted into the sterilant compartment Use: for reusable heat resistant medical devices
Keywords: CHEMICAL PREPARATIONS

SULFURIC ACID

STERILIZERS

ACETIC ACID

HYDROGEN PEROXIDE
Expiry date: 01 May 2028
Commodity code: 3808949090 (opens in new tab)

View ruling 600012695

Ruling reference 600012665

Description: Submucosal Lifting Agent used in endoscopic procedures to create a cushion-like space between the mucosa and underlining tissue Single use
Keywords: PHARMACEUTICAL PRODUCTS

AS LIQUID

FOR THERAPEUTIC USE

INJECTED

SODIUM CHLORIDE

MEDICAL SYRINGES
Expiry date: 01 May 2028
Commodity code: 3004900000 (opens in new tab)

View ruling 600012665

Ruling reference 600012552

Description: The product is a wall mounted awning. The awning is made from is aluminium, steel and polyester fabric. A steel bar is attached to the wall (using screws and bolts provided) which provides structural support to hold the awning in place during use. An aluminium front bar forms the leading edge of the awning, serving as an anchor point for the polyester fabric. There are also aluminium extendable arms that are used to support the awning when deployed. The polyester fabric is PU-coated, and waterproof and provides protection against the sun and rain. This structure is a non-permanent fixture and can be taken down.
Keywords: PUT UP FOR RETAIL SALE

WITH METAL

AWNINGS

WALL MOUNTED

SUN SHADE

FABRIC
Expiry date: 01 May 2028
Commodity code: 6306120000 (opens in new tab)

View ruling 600012552

Ruling reference 600012477

Description: Woven one-piece dry suit for men Designed to cover the whole of the body including the feet Outer main is 100% nylon, with a polyurethane (PU) membrane lining with fully taped seams for a waterproof seal polyester reinforced seat and knees Rear entry with a waterproof zip fastening across the back of the shoulders. With a hood secured by a zip at the collar area, with a fleece inner chin guard and ventilation holes. Retaining loop at the back for stowing the hood when not in use. Neoprene overskirt with adjustable hook and loop to help refine fit. Inner neoprene gaskets at the neck and sleeve cuffs. Hook and loop adjustable fastening on the outer sleeve and ankle cuffs. Zipped pocket on the front left upper sleeve. With a waterproof relief zip at the front which denotes the garment is for a man. Available in Graphite and Bluejay In sizes XS to 2XL. Packaged in a plastic bag for retail sale.
Keywords: ONE-PIECE

WATERPROOF

WITH LINING

WITH POLYURETHANE

OF POLYESTER

WITH HOOK AND LOOP FASTENER

WITH HOOD

FOR MEN

WOVEN
Expiry date: 01 May 2028
Commodity code: 6210400000 (opens in new tab)

View ruling 600012477

Ruling reference 600012476

Description: Knitted fleece jacket for men 100% polyester Long sleeves with stretch binding at the cuffs, stand up collar, partial opening at the front, with a left over right stud fastening placket which reaches into the collar. Kangaroo style pocket with zip fastening at both sides. Adjustable hem. Company logo to the left chest. Available in dark navy and iron, sizes XS to 2XL.
Keywords: WITH PARTIAL OPENING

WITH POCKET

MENS GARMENT

FLEECE JACKET

KNITTED

WITH LONG SLEEVES
Expiry date: 01 May 2028
Commodity code: 6101309000 (opens in new tab)

View ruling 600012476

Ruling reference 600012475

Description: Unisex knitted fleece jacket 100% polyester with mesh drop lining Long sleeves with stretch binding at the cuffs, full length zip fastening at the front, round neckline with stretch binding at the collar. 2 zip pockets at the lower front and 1 zip pocket on the left chest area. Adjustable hem. Company logo to the left chest. Available in ash and dark navy, sizes XS to 2XL.
Keywords: KNITTED

WITH POCKET

WITH ZIP FASTENER

OF POLYESTER

UNISEX

FLEECE JACKET
Expiry date: 01 May 2028
Commodity code: 6102309000 (opens in new tab)

View ruling 600012475

Ruling reference 600013044

Description: A mans polyester knitted high visibility long sleeved polo shirt. The item has 3 buttons with a left over right closure. The item has a navy collar. There are 5cm high visibility reflective strips around sleeves and body. The product is Individually packed, imported in cartons of 40
Keywords: KNITTED

KNITTED FABRICS

HIGH VISIBILITY

TEXTILE ARTICLES

FOR MEN

TEXTILES AND TEXTILE ARTICLES
Expiry date: 30 Apr 2028
Commodity code: 6110309100 (opens in new tab)

View ruling 600013044

Ruling reference 600012577

Description: Molecular sieve presented in sachets Contains: synthetic sodium aluminosilicate (CAS number: 1318-02-1) Use as a moisture absorber Packaging: small bags (0.5g of molecular sieve per bag).
Keywords: CHEMICALS

ABSORBENT

SILICATES

INORGANIC COMPOUNDS

IN BAGS
Expiry date: 30 Apr 2028
Commodity code: 2842100090 (opens in new tab)

View ruling 600012577

Ruling reference 600012576

Description: Molecular sieve presented in sachets Contains: synthetic sodium aluminosilicate (CAS number: 1318-02-1) Use as a moisture absorber Packaging: small bags (225g of molecular sieve per bag).
Keywords: CHEMICALS

ABSORBENT

SILICATES

INORGANIC COMPOUNDS

IN BAGS
Expiry date: 30 Apr 2028
Commodity code: 2842100090 (opens in new tab)

View ruling 600012576

Ruling reference 600012465

Description: linear medium density polyethylene Physical form: pellets
Keywords: POLYETHYLENE

AS PRIMARY FORM

FOR MOULDING

AS GRANULES

LINEAR POLYETHYLENE

COPOLYMERS
Expiry date: 30 Apr 2028
Commodity code: 3901908099 (opens in new tab)

View ruling 600012465