Skip to main content

You can search using a combination of words, commodity codes and reference numbers.

Search results

Showing 5,726 to 5,750 of 6,684 results.

  1. Ruling reference 600008745

    Description
    Liquid urease inhibitor Liquid applied to Granular Urea to slow down the release of ammonium The active ingredient is N-(2-nitrophenyl)phosphoric triamide and contains other substances: vegetable oil, surfactant and water. Packaged : Liquid is put in intermediate bulk containers (IBC Tank)
    Keywords
    • VEGETABLE OILS
    • FOR FERTILIZERS
    • MIXTURES
    • ORGANIC COMPOUNDS
    • IN BULK
    • AS LIQUID
    • PREPARED
    • CHEMICALS
    • IN WATER
    Expiry date
    10 Oct 2026
    View ruling 600008745
  2. Ruling reference 600008744

    Description
    A fancy dress article intended for use by children, containing a garment, mask and lightsaber. The garment is knitted and is machine-made from 100% polyester excluding trim and mask. Lightsaber is made from plastic and used as a pretend sword. Packaged in a clear PPE bag.
    Keywords
    • KNITTED
    • WORN CLOTHING
    • MACHINE MADE
    • OF POLYESTER
    • OF PLASTIC
    • NONWOVENS
    • FANCY DRESSES
    Expiry date
    10 Oct 2026
    View ruling 600008744
  3. Ruling reference 600008595

    Description
    Relay Unit Panel The Relay Unit Panel is part of the Synchronous Drive Unit used with a Sonar, an underwater telephone fitted to both surface and submarine. It provides simplex communication between vessels. The item is made from multiple components including: stainless steel housing, Stainless steel fixings (screws, washers etc), wiring, electrical relays, electrical connectors. The unit controls the 400 Hz synchro supply. It also contains the relays which perform the Forward/Stern switching, and alignment functions. The primary function of the relay unit is to monitor input signals, and based on the logic, control relays to pass power & signals to other parts of the system. The relay unit monitors the +24V Enable input from the Synchronous drive unit, and when the signal is high, the 400Hz synchro supply is passed to the directing gears, Training Control Unit and other sonars. The alignment function is a means of resetting the directing gears position relative to the drive circuitry in the Synchronous Drive Unit to remove any drift built up over time. This is achieved by providing the synchro feedback from the directing gears into the input via the relay unit. There is also a rotary switch and lamp for monitoring fault detection circuits. The purpose of the rotary switch and the lamp is to locate power faults in the Synchronous Drive Unit. The voltage of the panel is 115 Volt AC & 26 Volt DC with a current of 0.1 Amp & 1.0 Amp. It is packaged in dedicated SPIS packaging (wooden crate).
    Keywords
    • FOR MONITORING
    • PANELS
    • UNDERWATER
    • FOR AUTOMATIC CONTROL
    • RELAYS
    Expiry date
    10 Oct 2026
    View ruling 600008595
  4. Ruling reference 600008546

    Description
    A tent made of white textile material coated on both sides with plastic, visible to the naked eye. The tent has two sidewalls with three plastic windows on the side. The tent also has two plastic coated textile sidewalls with two zippers on the left and right sides which creates an entrance to the tent, a plastic-coated textile roof with a steel base frame. Packaged in plastic bags and then the tent and the steel base frame are packaged into two cardboard boxes.
    Keywords
    • COATED
    • OF POLYETHYLENE
    • OF STEEL
    • WHITE
    • TENTS
    • OF PLASTIC
    Expiry date
    10 Oct 2026
    View ruling 600008546
  5. Ruling reference 600008545

    Description
    A cream-coloured gazebo with an aluminium base frame. The gazebo has two textile sidewalls with plastic windows and two textile sidewalls. The gazebo has a textile roof with a visible PVC coating on one side. Packaged in a plastic bag inside a black textile bag and then in a cardboard box.
    Keywords
    • CREAM
    • TENTS
    • OF TEXTILE MATERIAL
    • OF ALUMINIUM
    • OF POLYVINYL CHLORIDE
    • COATED
    Expiry date
    10 Oct 2026
    View ruling 600008545
  6. Ruling reference 600007019

    Description
    The product is a food grade supplement extracted from the root of a beetroot normally added to a tablets/capsules. At the point of import the material is not fit for human consumption. The extract is initially extracted before undergoing processes of filtration, purification, and concentration in that order. Finally it is dried and smashed before being stored and packed into 25kg drums. Contains 15% maltodextrin with the beetroot extract.
    Keywords
    • AS A SUPPLEMENT
    • MALTODEXTRIN
    • VEGETABLE EXTRACTS
    • PLANT BASED
    • BEETROOT
    Expiry date
    10 Oct 2026
    View ruling 600007019
  7. Ruling reference 600006955

    Description
    This product is an extract of Lutein (20%) from a marigold flower. The product is a food grade supplement normally added to a tablets/capsules. At the point of import the material is not fit for human consumption. The lutein is initially extracted before undergoing processes of filtration, purification, and concentration in that order. Finally it is dried and smashed before being stored and packed into 25kg drums. Contains 20% maltodextrin with the marigold extract.
    Keywords
    • FLOWER EXTRACTS
    • AS A SUPPLEMENT
    • MALTODEXTRIN
    • MARIGOLD EXTRACT
    • PLANT BASED
    Expiry date
    10 Oct 2026
    View ruling 600006955
  8. Ruling reference 600008833

    Description
    Unmounted copper optical mirror Used inside laser systems to reflect laser light. Made of copper. Machined from copper. Secured and packaged in metal containers to protect the mirror in transport.
    Keywords
    • MIRRORS
    • OF COPPER
    • OPTICAL ELEMENTS
    • LASERS
    • UNMOUNTED
    • OF GLASS
    Expiry date
    09 Oct 2026
    View ruling 600008833
  9. Ruling reference 600008659

    Description
    A round ceramic painted, glazed garden planter with a drainage hole in the bottom of the pot, 38cms (w) x 38cms (H)
    Keywords
    • DRAINED
    • OF CERAMIC
    • FOR PLANTS
    • PLANTERS
    • FOR OUTDOOR USE
    • WITH HOLE
    Expiry date
    09 Oct 2026
    View ruling 600008659
  10. Ruling reference 600008652

    Description
    A Terracotta round garden planter with embossed pattern on the sides. Drainage hole at the bottom Dimensions: 43cm (W) x 55cm (H)
    Keywords
    • DRAINED
    • OF CERAMIC
    • OF TERRACOTTA
    • PLANTERS
    • FOR THE GARDEN
    • POTS
    Expiry date
    09 Oct 2026
    View ruling 600008652
  11. Ruling reference 600008622

    Description
    Product is a tin of milk - solid ball dumplings in sugar syrup. The dumplings make up 43% of the tin and are made from Whole Milk Powder EU sourced, Refined Vegetable oil (Cotton seed oil) and Sugar Syrup with rose water and are in a sugar syrup made from sugar, water and rose water. The dumplings are cooked in a kettle before being added to the syrup. Contains over 5% of sucrose. The dumplings are considered the essential character, rather than the syrup. Ready for immediate consumption.
    Keywords
    • COOKED
    • WHEAT FLOUR
    • READY TO EAT
    • IN SYRUP
    • MILK POWDER
    • DOUGH
    • ROSE FLAVOURED
    • SUGAR SYRUPS
    • FOOD PREPARATION
    • SUGARS
    Expiry date
    09 Oct 2026
    View ruling 600008622
  12. Ruling reference 600008618

    Description
    Product is a spicy snack blend of puffed rice, gram noodles and peanuts. The puffed rice makes up the largest percentage of the mix and therefore has been classified as such. Mix contains: Puffed Rice, Roasted Gram, Mustard Oil, Edible Vegetable Oil (Palmolein Oil and/or Cottonseed Oil), Red Peanut, Dehydrated Potato Flakes, Gram Flour, Dew Bean Flour (Moth Flour), Potato Starch, Tapioca Starch, Iodised Salt (Edible Common Salt), Turmeric (Colouring & Spices), Long pepper, Coriander, Dried Curry Leaves, Cardamom, Fennel Seeds, Mustard Seeds, Chilli (Red Chilli), Clove, Black Pepper, Dry Ginger, Cumin and Nutmeg. The rice and noodles are both puffed or extruded. Product is ready for immediate consumption.
    Keywords
    • SNACKFOODS
    • MIXTURES OF SPICES
    • RICE
    • NOODLES
    • PEANUTS
    • PUFFED RICE
    Expiry date
    09 Oct 2026
    View ruling 600008618
  13. Ruling reference 600008617

    Description
    Product is a tin of milk- solid ball dumplings in sugar syrup. The dumplings make up 43% of the tin and are made from Whole Milk Powder EU sourced, Refined Vegetable oil, Sugar Syrup, Wheat Flour, Maize Starch, Semolina (Wheat) and Cardamom Powder and are in a sugar syrup made from sugar and water. The dumplings are fried before being added to the syrup. Contains over 5% of sucrose. The dumplings are considered the essential character, rather than the syrup. Ready for immediate consumption.
    Keywords
    • WHEAT FLOUR
    • READY TO EAT
    • IN SYRUP
    • FRIED
    • MILK POWDER
    • DOUGH
    • SUGAR SYRUPS
    • FOOD PREPARATION
    • SUGARS
    Expiry date
    09 Oct 2026
    View ruling 600008617
  14. Ruling reference 600006763

    Description
    A 22-piece interactive playset robot unicorn toy for children to learn coding skills through fun, imaginative play. Designed to help kids develop critical thinking, problem-solving, teamwork, and collaboration skills. Children press the four directional arrows on the coding wand, and press Go which sends the robot on a journey. Switch the wand to Spell mode, then open the enchanted spell book to find the mystical codes and activities and cast a few training spells. Unicorn toy robot and the wand require 5 AAA batteries, not included. Robot measures 10cm H x 14cm L. Product is made from plastic. Retail cardboard packaging.
    Keywords
    • FOR CHILDREN
    • TOYS
    • WITH SELF-CONTAINED MOTOR
    • OF PLASTIC
    • TOY SETS
    • EDUCATIONAL
    • FOR ENTERTAINMENT
    Expiry date
    09 Oct 2026
    View ruling 600006763
  15. Ruling reference 600006762

    Description
    22-piece interactive playset robot dragon intended to teach your pre-school children early coding skills. Includes a coding wand which can make the robot dragon light up, dance and perform various other functions. Children press the four directional arrows on the coding wand, and press Go which sends dragon robot on a journey. Switch the wand to Spell mode, then open the enchanted spell book to find the mystical codes and activities and cast a few training spells. Designed to encourage critical thinking, problem-solving, teamwork, and collaboration skills. Dragon robot and the wand require 5 AAA batteries, not included. Robot measures 10cm High x 14cm Long. Retail cardboard packaging.
    Keywords
    • TOYS
    • OF PLASTIC
    • TOY SETS
    • FOR CHILDREN
    • INTERACTIVE
    • EDUCATIONAL
    • ROBOTS
    • FOR ENTERTAINMENT
    Expiry date
    09 Oct 2026
    View ruling 600006762
  16. Ruling reference 600008812

    Description
    Jackfruit burger . This is jackfruit which has been coated in batter and pre cooked. Product is then packaged and frozen. Ingredients: Jackfruit 55% WHEAT Flour (Contains GLUTEN), Fully Refined Soya Bean Oil, Cornflour, Tapioca Starch, Sugar, Garlic Powder, Onion Powder, Yeast Extract, Salt, Raising Agents (Diphosphate, Sodium Bicarbonate), Herbs & Spices, Chilli Powder, Yeast, Turmeric, White Pepper, Dextrose
    Keywords
    • WHEAT FLOUR
    • SPICES AND HERBS
    • JACKFRUIT
    • FOOD PREPARATION
    • SUGARS
    Expiry date
    08 Oct 2026
    View ruling 600008812
  17. Ruling reference 600008777

    Description
    Period pants. These are made from three layers: Layer 1 polyester as wicking layer Layer 2 polyester as absorbent layer Layer 3 Polyester coated with Polyurethane as barrier The pants are re useable, they can be washed and re used up t0 50 times.
    Keywords
    • SANITARY WARE
    • KNITTED FABRICS
    • OF POLYESTER
    • TEXTILE ARTICLES
    • REUSABLE
    Expiry date
    08 Oct 2026
    View ruling 600008777
  18. Ruling reference 600008773

    Description
    A strap used to secure a bags and heating devices around the body. It has an adjustable webbing strap for comfort and has a quick release buckle to make it easier to remove. The strap when fully extended measures 690mm(L) x 40mm (W) x 10mm (H). Made from 100% woven polyester. The strap is packed in a cardboard box with instructions. It is produced in China.
    Keywords
    • FOR SECURING
    • OF WOVEN TEXTILE MATERIAL
    • STRAPS
    • WOVEN
    • WITH FASTENING
    • POLYESTERS
    Expiry date
    08 Oct 2026
    View ruling 600008773
  19. Ruling reference 600008715

    Description
    3D printer which uses filaments made from polymers, but can also use speciality filaments to make PET-carbon fibre. The machine heats up the filament and melts the material and extrudes through a nozzle, of which this can move to different positions to create the design which has been stored and controlled into the software. It creates the object by building up the layers. The printers are assembled with of the shelf components and the main case for the printer is made from aluminium frame with solid bamboo sides, powder coated stamped steel top and plastic backing. Is used by a diverse range (artists, heritage, architects, aerospace, and lighting industry. The vertices are protected using 8 Stratocell foam corners. The bed is held in place using a cardboard insert. Once boxed, the packages are strapped to hold the box intact.
    Keywords
    • ASSEMBLED
    • ELECTRIC
    • PLASTICS
    • MECHANICAL/ELECTRICAL APPARATUS
    • PRINTERS
    • THREE-DIMENSIONAL (3D)
    Expiry date
    08 Oct 2026
    View ruling 600008715
  20. Ruling reference 600008519

    Description
    A 70cm long by 33cm wide green and yellow fish-shaped pillow, made from 100% Polyester. The body of the pillow is stuffed, and there are two fin designs on the body. The pillow has three unstuffed fins and an unstuffed tail fin. The pillow has an attached hanging tag with information about the product. Packaged in a polybag.
    Keywords
    • CARP
    • FISH
    • OF POLYESTER
    • GREEN
    • STUFFED
    • OF SYNTHETIC TEXTILE MATERIAL
    • PILLOWS
    Expiry date
    08 Oct 2026
    View ruling 600008519
  21. Ruling reference 600008390

    Description
    A pack of six stamps made from polypropylene, ethylene vinyl acetate (EVA) and acrylonitrile-butadiene-styrene (ABS). The body of the stamp is made of polypropylene and the bottom of the stamp is made from EVA and ABS plastic. Available in two different designs, one design is of dinosaurs and the other design is of unicorns. Packed in a blister pack made of cardboard and polyvinyl chloride.
    Keywords
    • FOR STAMPING
    • OF POLY PROPYLENE
    • HAND OPERATED
    • HANDHELD
    Expiry date
    08 Oct 2026
    View ruling 600008390
  22. Ruling reference 600007290

    Description
    Product is a pack of hook and loop sticky pads in a pack of 36. The pack contains 2 sets of pads, one with textile loops and one with textile hoops that work in the same way as Velcro. Both pads have an adhesive backing and will be used together. Once they are put together, the glue is on both sides and therefore is the essential character. Made from polyester fabric, glue and paper. Packaged in a cardboard box. Product weighs 0.05kg.
    Keywords
    • WITH GLUED SURFACE
    • OF TEXTILE MATERIAL
    • HOOK AND LOOP
    • ADHESIVES
    • OF POLYESTER
    • SELF-ADHESIVE
    Expiry date
    08 Oct 2026
    View ruling 600007290
  23. Ruling reference 600008702

    Description
    139 cast bronze components that will form the outer decorative shell of a mausoleum to house human remains and ashes. These 139 components will be bolted together. This work is incomplete, and the mausoleum will be an outside structure. The cast bronze components have been metal worked to a smooth surface but the work is incomplete and will require additional elements, assembly and surface work after export. The cast bronze material is C95800. The cast bronze panels to be exported will be packed shrink wrapped on Euro pallets and exported in several batches. The panels with be bolted together abroad to make a shell that will cover the internal structure of the Mausoleum. The internal structure of the final Mausoleum will be eventually be from steel. These will be made of shelves that will hold the coffins and urns. The coffins will also be further worked aboard at the same time.
    Keywords
    • PREFABRICATED BUILDINGS
    • STRUCTURES
    • OF BRONZE
    • CAST
    • PANELS
    Expiry date
    07 Oct 2026
    View ruling 600008702
  24. Ruling reference 600008845

    Description
    The product is an analyser designed to measure a wide range of sample types and concentrations. the measurement of size, molecular weight and zeta potential of dispersed particles and molecules. The system includes max 4mW HeNe laser (633nm) with high sensitivity APD (avalanche photodiode) detector. Size and molecular weight by DLS/SLS measured at 173-degrees. It offers wide dynamic concentration capability and high sensitivity due to the non-invasive back scatter (nibs) optical design. The adaptive correlation feature enhances sample throughput by reducing measurement duration and providing greater sample knowledge. the optical filter wheel allows measurement of fluorescent samples without impacting overall instrument sensitivity. with its unique adaptive correlation for faster, reproducible, DLS measurements with no data loss. Zeta potential analysis incorporates M3-PALS and Constant Current Zeta Mode or measurement of zeta potential distributions and improved data quality in conductive media. Also, includes ZS Xplorer Applicaton Software with its easy to use method builder for measurement control and data analysis with advanced data quality assessment and advice system. Zetasizer Advance Pro Specifications:- SIZE Range – 0.3nm to 10um Minimum Volume – 12uL Zeta Potential: - Size range – 38nm – 100um Minimum Volume – 20uL
    Keywords
    • FOR ANALYSIS
    • DETECTORS
    • WITH MEASURING DEVICE
    • FOR PARTICLES
    • LASERS
    • COMPUTER INTERFACES
    Expiry date
    05 Oct 2026
    View ruling 600008845
  25. Ruling reference 600008748

    Description
    Battery for E-Liquid pods. A rechargeable, non-removable lithium-ion battery. Used with E-liquid pods for vape Devices (sold separately). The battery supplies the power to heat the atomiser and converts the liquid to vapour for inhalation by the User. An LED light indicates the product is in use, and flashes when the pod is depleted or a short circuit I has occurred, or the item has overheated. The product contains a 3.7V, 500mAh, 1.85Wh battery which is rechargeable. No charging cable is supplied with this product. The item has a Polycarbonate moulded plastic body, electrical wires, end cap with LED indicator and USB fast charging port.
    Keywords
    • LITHIUM BATTERIES
    • ACCUMULATOR CHARGERS
    • ACCUMULATORS
    • RECHARGEABLE, BATTERIES
    Expiry date
    05 Oct 2026
    View ruling 600008748